Forum Index  ViceVersa HOME         FAQ and Knowledge Base

 FAQForum FAQ   SearchSearch Forum  RegisterRegister 
 ProfileProfile   Log inLog in 

File Sync copies files to all folders, instead of one.

 
Post new topic   Reply to topic     Forum Index -> Support
Author Message
Kayesmj
Guest





PostPosted: Tue May 09, 2006 8:03 pm    Post subject: File Sync copies files to all folders, instead of one. Reply with quote

I'm testing the demo version of VV and I'm having a problem with the syncronization feature. I have a SnapAppliance Server 2200 portable NAS device, I have created 5 test folders on the Raid 1 NAS device named Test1, Test2, and so on.

I have the VV profile to compare a single folder that contains many subfolders on one of our servers to the Test1 Folder on the NAS device. Of course I then want it to copy all changed/new files between the two folders, but for some reason it is copying all the changed/new files to all of the folders on the Targeted NAS device. So I end up having all 5 Test folders full of the same data when I only designated the Target to be Test1 Folder. does anyone have any advice?

Thanks.

Michael K
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8769

PostPosted: Wed May 10, 2006 12:03 am    Post subject: Reply with quote

Hello

can you post the content of the profile file? When you save the profile it is saved to a file with extension .fsf which can be opened with NotePad. Please copy and paste in this post, so we can check the settings you are using

thanks!
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
kayesmj
Guest





PostPosted: Wed May 10, 2006 1:23 pm    Post subject: test.fsf Reply with quote

here is the file pasted

[Settings]
; ******* Source
Source Folder=C:\Documents and Settings\kayesm\My Documents\
; ******* Target folder is \\server\test1, there are also other folders on the root of

'server'
Target Folder=X:\
; ******* values for Lock Source: (0=No) (1=Yes)
Lock Source=0
; ******* values for Lock Target: (0=No) (1=Yes)
Lock Target=0
; ******* values for Continue even if sources/targets do not exist: (0=No) (1=Yes)
Continue even if sources/targets do not exist=0
; ******* values for Create sources/targets that do not exist: (0=No) (1=Yes)
Create sources/targets that do not exist=0
Connect to network with default user credentials=0
Connect to network with credentials=0
; *******
Connect network path=
; *******
Connect user=
; *******
Connect password=010101
Disconnect from network when done=0
; *******
Include Subfolders Flags=1
; ******* values for Comparison Type: (0=Size and Timestamp) (1=CRC) (2=Both)
Comparison Type=0
; ******* values for Ignore 2 seconds difference: (0=No) (1=Yes)
Ignore 2 seconds difference=1
; ******* values for Ignore any second difference: (0=No) (1=Yes)
Ignore any second difference=0
; ******* values for Ignore 1 hour difference: (0=No) (1=Yes)
Ignore 1 hour difference=1
CRC Chunk Size in Bytes=0
; ******* values for Ignore File Size: (0=No) (1=Yes)
Ignore File Size=0
; ******* values for Ignore Timestamp: (0=No) (1=Yes)
Ignore Timestamp=0
; ******* values for Execution Method: (0= ) (1=Synchronization) (2=Backup (Mirror Source to

Target)) (3=Replication (Augment Target)) (4=Replication (Refresh Target)) (5=Replication

(Update Target)) (6=Consolidation)
Execution Method=1
; ******* values for UnatSync: (0=No) (1=Yes)
UnatSync=0
Copy File Permissions=1
Copy File/Folder Permissions=1
Copy File/Folder Auditing=0
Copy File/Folder Owner=0
Do Not Copy File/Folder Data Streams=0
Use Volume Shadow Copy=0
; ******* values for Use Volume Shadow Copy For: (0=Source) (1=Target) (2=Both)
Use Volume Shadow Copy For=0
; ******* values for No empty source/target check: (0=No) (1=Yes)
No empty source/target check=0
; ******* values for Replace newer target files with older source files (backup only):

(0=No) (1=Yes)
Replace newer target files with older source files (backup only)=0
Speed=100
Copy Buffer=32768
Flush Buffer=0
; ******* Log File
Log File=
; ******* values for Empty Log: (0=No) (1=Yes)
Empty Log=0
Log File Size=0
; ******* values for Log Only Summary and Exceptions: (0=No) (1=Yes)
Log Only Summary and Exceptions=0
; ******* values for Monitor Conflicts: (0=No) (1=Yes)
Monitor Conflicts=1
; ******* Sync Tracking Database
Sync Tracking Database=C:\Documents and Settings\All Users\Application Data\ViceVersa PRO

2\vvdb2.tdb
Sync Conflicts=0
; ******* values for SCT: (0=No) (1=Yes)
SCT=0
; ******* values for NSC: (0=No) (1=Yes)
NSC=0
Source-Target Offset=0
; ******* values for Try Copy In Use Files: (0=No) (1=Yes)
Try Copy In Use Files=0
; ******* values for Always Verify CRC: (0=No) (1=Yes)
Always Verify CRC=0
; ******* values for Priority Class: (0=Default) (1=Idle (recommended)) (2=Low) (3=Below

Normal) (4=Normal) (5=Above Normal) (6=High) (7=Realtime)
Priority Class=0
; ******* values for Limit Bandwidth: (0=No) (1=Yes)
Limit Bandwidth=0
Bandwidth Value=5
; ******* values for Bandwidth Unit: (0=KB/Sec) (1=MB/Sec)
Bandwidth Unit=1
; ******* values for Scripts Before: (0=No) (1=Yes)
Scripts Before=0
; ******* values for Scripts After: (0=No) (1=Yes)
Scripts After=0
; ******* Source Archive
Source Archive Folder=
; ******* Target Archive
Target Archive Folder=
; ******* values for Smart Archive: (0=No) (1=Yes)
Smart Archive=0
; ******* values for Move Files To Archive: (0=No) (1=Yes)
Move Files To Archive=0
; ******* values for Archive Conflicts Only: (0=No) (1=Yes)
Archive Conflicts Only=0
Num. Copies=0
Remove Days=0
Append Path=0
Max Archive Size=0
DES=0
; *******
ComEnc String=
[Filters]
; ******* values for Exclude Hidden Files: (0=No) (1=Yes)
Exclude Hidden Files=0
; ******* values for Exclude System Files: (0=No) (1=Yes)
Exclude System Files=0
; ******* values for Exclude Read-Only Files: (0=No) (1=Yes)
Exclude Read-Only Files=0
; *******
Exclude After Date=
; *******
Exclude Before Date=
Exclude Days Ago=0
Exclude Greater than bytes=0
Exclude Smaller than bytes=0
Num. of Filters=0
[FiltersDirs]
Num. of Filters=0
[ArchiveFilters]
Num. of Filters=0
[Subfolder Filters]
; ******* values for Exclude Empty Subfolders: (0=No) (1=Yes)
Exclude Empty Subfolders=0
; ******* values for Exclude Hidden Subfolders: (0=No) (1=Yes)
Exclude Hidden Subfolders=0
; ******* values for Exclude System Subfolders: (0=No) (1=Yes)
Exclude System Subfolders=0
; ******* values for Exclude Read-Only Subfolders: (0=No) (1=Yes)
Exclude Read-Only Subfolders=0
[ViceVersa Profile - File Version 4.0.0]
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8769

PostPosted: Thu May 11, 2006 12:25 am    Post subject: Reply with quote

Beats me, looking at the settings the sync should only involve
C:\Documents and Settings\kayesm\My Documents\ and X:\ (\\server\test1) not the other folders.

You can setup a log in the Viceversa profile settings. That may contain more info on what files are copied where after a run ....
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Support All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © phpBB Group
Copyright © TGRMN Software. TGRMN Software products: