| Author |
Message |
kirkdickinson
Joined: 15 May 2008
Posts: 63
|
 Posted: Wed Oct 21, 2020 9:00 pm Post subject: Trouble Shooting VVEngine and firewall? |
 |
|
I have VVEngine installed on 5 machines. I can use my web browser on my computer to access 3 of the 5 machines. 2 of them, nothing I have done seems to work.
I have the allowed IP settings in VVEngine Settings set to 127.0.0.1|192.168.0.*
I have opened the firewall on these machines and created an entry to allow vvengine.exe and also to allow port 8001.
The settings seem to be the same on the machines that work and the machines that don't. I am mystified. |
|
| Back to top |
|
 |
TGRMN Software
Site Admin
Joined: 10 Jan 2005
Posts: 8762
|
| Posted: Wed Oct 21, 2020 11:03 pm Post subject: |
|
|
Have a look at VVEngine.log to see if it is VVEngine that is not accepting the connection, if that is the case it should be logged there.
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com |
|
| Back to top |
|
|
kirkdickinson
Joined: 15 May 2008
Posts: 63
|
| Posted: Thu Oct 22, 2020 12:18 am Post subject: |
|
|
| TGRMN Software wrote: | | Have a look at VVEngine.log to see if it is VVEngine that is not accepting the connection, if that is the case it should be logged there. |
Yes. It wasn't the firewall. I checked my settings and the added IP address hadn't "Stuck". I realized that there are two "Apply" buttons. I was hitting the wrong one.
Thanks,
Kirk |
|
| Back to top |
|
|
TGRMN Software
Site Admin
Joined: 10 Jan 2005
Posts: 8762
|
|
| Back to top |
|
|
|
ViceVersa HOME 
Forum FAQ
Search Forum
Register
Profile
Log in
