Author |
Message |
jsmith
Joined: 16 Mar 2006 Posts: 13
|
Posted: Thu Mar 23, 2006 11:24 pm Post subject: Popup Prompt Issue |
|
|
Schedule backup job got a lot of popup prompt and waiting for a user interupt to click OK to continue. How can we turn off all these prompts?
The Popup prompt messages were like this:
Backup file "Archieved directory\path\filename" has timestamp identifier in the future. File ignored. If you want to remove it, you need to remove it manually.
Please help |
|
Back to top |
|
|
TGRMN Software Site Admin
Joined: 10 Jan 2005 Posts: 8769
|
|
Back to top |
|
|
jsmith
Joined: 16 Mar 2006 Posts: 13
|
Posted: Fri Mar 24, 2006 1:12 am Post subject: |
|
|
Froom Tools, then Schedule ... If I manual click Compare and Execute, the result was the same. The Backup fsf is attached for your referience. Maybe my configuration setting is not correct.
[Settings]
; ******* Source
Source Folder=\\Cl3kdc00\clnapps\ | \\No3kdc01\ClnApps\
; ******* Target
Target Folder=D:\Sites\CL\ClnApps\ | D:\Sites\NO\ClnApps\
; ******* values for Lock Source: (0=No) (1=Yes)
Lock Source=0
; ******* values for Lock Target: (0=No) (1=Yes)
Lock Target=0
; ******* values for Continue even if sources/targets do not exist: (0=No) (1=Yes)
Continue even if sources/targets do not exist=1
; ******* values for Create sources/targets that do not exist: (0=No) (1=Yes)
Create sources/targets that do not exist=1
; *******
Include Subfolders Flags=1|1|1|1|1|1|1
; ******* values for Comparison Type: (0=Size and Timestamp) (1=CRC) (2=Both)
Comparison Type=0
; ******* values for Ignore 2 seconds difference: (0=No) (1=Yes)
Ignore 2 seconds difference=0
; ******* values for Ignore any second difference: (0=No) (1=Yes)
Ignore any second difference=1
; ******* values for Ignore 1 hour difference: (0=No) (1=Yes)
Ignore 1 hour difference=0
CRC Chunk Size in Bytes=0
; ******* values for Ignore File Size: (0=No) (1=Yes)
Ignore File Size=0
; ******* values for Ignore Timestamp: (0=No) (1=Yes)
Ignore Timestamp=0
; ******* values for Execution Method: (0= ) (1=Synchronization) (2=Backup (Mirror Source to Target)) (3=Replication (Augment Target)) (4=Replication (Refresh Target)) (5=Replication (Update Target)) (6=Consolidation)
Execution Method=2
; ******* values for UnatSync: (0=No) (1=Yes)
UnatSync=1
Copy File Permissions=1
Copy File/Folder Permissions=1
Copy File/Folder Auditing=0
Copy File/Folder Owner=0
Do Not Copy File/Folder Data Streams=0
Use Volume Shadow Copy=0
; ******* values for Use Volume Shadow Copy For: (0=Source) (1=Target) (2=Both)
Use Volume Shadow Copy For=0
; ******* values for No empty source/target check: (0=No) (1=Yes)
No empty source/target check=1
; ******* values for Replace newer target files with older source files (backup only): (0=No) (1=Yes)
Replace newer target files with older source files (backup only)=1
Speed=33
Copy Buffer=32768
Flush Buffer=1
; ******* Log File
Log File=C:\Documents and Settings\All Users\Application Data\ViceVersa PRO 2\log3.log
; ******* values for Empty Log: (0=No) (1=Yes)
Empty Log=1
Log File Size=1000
; ******* values for Log Only Summary and Exceptions: (0=No) (1=Yes)
Log Only Summary and Exceptions=1
; ******* values for Monitor Conflicts: (0=No) (1=Yes)
Monitor Conflicts=0
; ******* Sync Tracking Database
Sync Tracking Database=C:\Documents and Settings\All Users\Application Data\ViceVersa PRO 2\vvdb1.tdb
Sync Conflicts=0
; ******* values for SCT: (0=No) (1=Yes)
SCT=1
; ******* values for NSC: (0=No) (1=Yes)
NSC=1
Source-Target Offset=0
; ******* values for Try Copy In Use Files: (0=No) (1=Yes)
Try Copy In Use Files=1
; ******* values for Always Verify CRC: (0=No) (1=Yes)
Always Verify CRC=0
; ******* values for Priority Class: (0=Default) (1=Idle (recommended)) (2=Low) (3=Below Normal) (4=Normal) (5=Above Normal) (6=High) (7=Realtime)
Priority Class=4
; ******* values for Limit Bandwidth: (0=No) (1=Yes)
Limit Bandwidth=0
Bandwidth Value=5
; ******* values for Bandwidth Unit: (0=KB/Sec) (1=MB/Sec)
Bandwidth Unit=1
; ******* values for Scripts Before: (0=No) (1=Yes)
Scripts Before=0
; ******* values for Scripts After: (0=No) (1=Yes)
Scripts After=0
; ******* Source Archive
Source Archive Folder=
; ******* Target Archive
Target Archive Folder=D:\Deleted\
; ******* values for Smart Archive: (0=No) (1=Yes)
Smart Archive=1
; ******* values for Archive Conflicts Only: (0=No) (1=Yes)
Archive Conflicts Only=0
Num. Copies=0
Remove Days=0
Append Path=1
Max Archive Size=0
DES=0
; *******
ComEnc String=
[Filters]
; ******* values for Exclude Hidden Files: (0=No) (1=Yes)
Exclude Hidden Files=1
; ******* values for Exclude System Files: (0=No) (1=Yes)
Exclude System Files=1
; ******* values for Exclude Read-Only Files: (0=No) (1=Yes)
Exclude Read-Only Files=0
; *******
Exclude After Date=
; *******
Exclude Before Date=
Exclude Days Ago=0
Exclude Greater than bytes=0
Exclude Smaller than bytes=0
Num. of Filters=54
Filter 0=Exclude
Filter 1=*.bmp
[FiltersDirs]
Num. of Filters=0
[ArchiveFilters]
Num. of Filters=0
[Subfolder Filters]
; ******* values for Exclude Hidden Subfolders: (0=No) (1=Yes)
Exclude Hidden Subfolders=0
; ******* values for Exclude System Subfolders: (0=No) (1=Yes)
Exclude System Subfolders=1
; ******* values for Exclude Read-Only Subfolders: (0=No) (1=Yes)
Exclude Read-Only Subfolders=0
[ViceVersa Profile - File Version 4.0.0] |
|
Back to top |
|
|
|