Forum Index  ViceVersa HOME         FAQ and Knowledge Base

 FAQForum FAQ   SearchSearch Forum  RegisterRegister 
 ProfileProfile   Log inLog in 

Synchronization Not Finding Target Changes Without TDB Reset

 
Post new topic   Reply to topic     Forum Index -> Support
Author Message
jasmoo



Joined: 20 Jan 2013
Posts: 20

PostPosted: Mon May 25, 2015 3:36 pm    Post subject: Synchronization Not Finding Target Changes Without TDB Reset Reply with quote

I have set up a Synchronization between two Source machines and one Target machine. Each Source runs independently with its own profile and tracking database. The Synch involves one folder and perhaps 25 subfolders. The Sources are not detecting changes in the Target unless the Tracking Database is reset, in which case it works once. Source changes seem to work fine. I am using VV Pro2.5 bld 2513 and VVScheduler 2.0.0.6. One Source is Windows 8.1, the others are Windows 7. Any thoughts?
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8758

PostPosted: Tue May 26, 2015 1:29 am    Post subject: Reply with quote

Hello, can you please post the two profiles here (they are text files , so you can copy and paste content). thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
jasmoo



Joined: 20 Jan 2013
Posts: 20

PostPosted: Thu May 28, 2015 4:49 pm    Post subject: Requested Profiles Reply with quote

The requested profiles are included below. SORRY about the delay; I though I posted these several days ago but apparently they got lost somehow. Note that S:\ and R:\ are network drives that point to the same location.

Thank you for your attention to this.

---------------- Source A - SallyMae -------------------
[Settings]
; ******* Source
Source Folder=D:\ProgramData\RoboForm\
; ******* Target
Target Folder=R:\RoboForm\
; ******* values for Lock Source: (0=No) (1=Yes)
Lock Source=0
; ******* values for Lock Target: (0=No) (1=Yes)
Lock Target=0
; ******* values for Continue even if sources/targets do not exist: (0=No) (1=Yes)
Continue even if sources/targets do not exist=0
; ******* values for Create sources/targets that do not exist: (0=No) (1=Yes)
Create sources/targets that do not exist=1
Connect to network with default user credentials=0
Connect to network with credentials=0
; *******
Connect network path=
; *******
Connect user=
; *******
Connect password=010101
Disconnect from network when done=0
; *******
Include Subfolders Flags=1
; ******* values for Comparison Type: (0=Size and Timestamp) (1=CRC) (2=Both)
Comparison Type=0
; ******* values for Ignore 2 seconds difference: (0=No) (1=Yes)
Ignore 2 seconds difference=0
; ******* values for Ignore any second difference: (0=No) (1=Yes)
Ignore any second difference=1
; ******* values for Ignore 1 hour difference: (0=No) (1=Yes)
Ignore 1 hour difference=0
CRC Chunk Size in Bytes=0
; ******* values for Ignore File Size: (0=No) (1=Yes)
Ignore File Size=0
; ******* values for Ignore Timestamp: (0=No) (1=Yes)
Ignore Timestamp=0
; ******* Specify file extensions, separated by comma (example *.mdf, *.ind)
Files with these extensions are always newer in source=
; ******* values for Execution Method: (0= ) (1=Synchronization) (2=Backup (Mirror Source to Target)) (3=Replication (Augment Target)) (4=Replication (Refresh Target)) (5=Replication (Update Target)) (6=Consolidation)
Execution Method=1
; ******* values for UnatSync: (0=No) (1=Yes)
UnatSync=0
Copy File Permissions=1
Copy File/Folder Permissions=1
Copy File/Folder Auditing=0
Copy File/Folder Owner=0
Do Not Copy File/Folder Data Streams=0
Use Volume Shadow Copy=1
; ******* values for Use Volume Shadow Copy For: (0=Source) (1=Target) (2=Both)
Use Volume Shadow Copy For=0
; ******* values for Create Volume Shadow Copy before comparing source and target: (0=No) (1=Yes)
Create Volume Shadow Copy before comparing source and target=0
; ******* values for Volume Shadow Copy log level: (0=Standard) (1=Detailed)
Volume Shadow Copy log level=0
; ******* values for No empty source/target check: (0=No) (1=Yes)
No empty source/target check=0
; ******* values for Retain folder timestamps: (0=No) (1=Yes)
Retain folder timestamps=0
; ******* values for Retain Windows EFS encryption: (0=No) (1=Yes)
Retain Windows EFS encryption=0
; ******* values for Retain Windows NTFS compression: (0=No) (1=Yes)
Retain Windows NTFS compression=0
; ******* values for Replace newer target files with older source files (backup only): (0=No) (1=Yes)
Replace newer target files with older source files (backup only)=0
Speed=100
Copy Buffer=32768
Flush Buffer=0
Use Windows Native File Copy=1
Unbuffered File Copy=0
Network Friendly Scanning=1
; ******* Log File
Log File=D:\DataFiles\ViceVersaPro\Logs\VVlog-SallyMae-SynchRobo.log
; ******* values for Empty Log: (0=No) (1=Yes)
Empty Log=0
Log File Size=10000
; ******* values for Log Only Summary and Exceptions: (0=No) (1=Yes)
Log Only Summary and Exceptions=1
; ******* values for Monitor Conflicts: (0=No) (1=Yes)
Monitor Conflicts=1
; ******* values for Tracking Database Enabled: (0=No) (1=Yes)
Tracking Database Enabled=1
; ******* Sync Tracking Database
Sync Tracking Database=D:\DataFiles\ViceVersaPro\TrackingDatabase\SallyMae-SynchR.tdb
Sync Conflicts=1
Sync One-Way Source to Target Only=0
; ******* values for SCT: (0=No) (1=Yes)
SCT=1
; ******* values for NSC: (0=No) (1=Yes)
NSC=0
Source-Target Offset=0
; ******* values for Try Copy In Use Files: (0=No) (1=Yes)
Try Copy In Use Files=0
; ******* values for Skip In Use Files: (0=No) (1=Yes)
Skip In Use Files=0
; ******* values for Always Verify CRC: (0=No) (1=Yes)
Always Verify CRC=0
; ******* values for Priority Class: (0=Default) (1=Idle) (2=Low) (3=Below Normal) (4=Normal) (5=Above Normal) (6=High) (7=Realtime)
Priority Class=5
; ******* values for Limit Bandwidth: (0=No) (1=Yes)
Limit Bandwidth=0
Bandwidth Value=5
; ******* values for Bandwidth Unit: (0=KB/Sec) (1=MB/Sec)
Bandwidth Unit=1
; ******* values for Scripts Before: (0=No) (1=Yes)
Scripts Before=0
; ******* values for Scripts Before Comparison Global: (0=No) (1=Yes)
Scripts Before Comparison Global=0
; ******* values for Scripts Before Comparison Local: (0=No) (1=Yes)
Scripts Before Comparison Local=0
; ******* values for Scripts Before Comparison Specify: (0=No) (1=Yes)
Scripts Before Comparison Specify=0
; ******* Script to run before comparison
Script Before Comparison Path=
; ******* values for Scripts After: (0=No) (1=Yes)
Scripts After=0
; ******* values for Scripts After Execution Global: (0=No) (1=Yes)
Scripts After Execution Global=0
; ******* values for Scripts After Execution Local: (0=No) (1=Yes)
Scripts After Execution Local=0
; ******* values for Scripts After Execution Specify: (0=No) (1=Yes)
Scripts After Execution Specify=0
; ******* Script to run after execution
Script After Execution Path=
; ******* values for Send E-Mail on Error: (0=No) (1=Yes)
Send E-Mail on Error=1
; ******* values for Send E-Mail on Success: (0=No) (1=Yes)
Send E-Mail on Success=0
; *******
Send E-Mail on Error Condition=
; *******
Send E-Mail on Success Condition=
; ******* E-Mail address to send E-Mail TO
Send E-Mail - TO=misterjmm@gmail.com
; ******* E-Mail address to send E-Mail FROM
Send E-Mail - FROM=jasmoo.1940@gmail.com
; ******* SMTP Server Name
Send E-Mail - SMTP Server Name=smtp.gmail.com
Send E-Mail - Port=587
; ******* values for Send E-Mail - Authenticate using Name and Password: (0=No) (1=Yes)
Send E-Mail - Authenticate using Name and Password=1
; ******* User Name
Send E-Mail - User Name=jasmoo.1940
; ******* User Password
Send E-Mail - Password=(removed)
; ******* values for Send E-Mail - Use Secure Connection: (0=No) (1=Yes)
Send E-Mail - Use Secure Connection=1
; ******* values for POP3 Authenticate using Name and Password: (0=No) (1=Yes)
POP3 Authenticate using Name and Password=0
; ******* POP3 Server Name
POP3 Server Name=pop.gmail.com
POP3 Port=995
; ******* E-Mail Subject
E-Mail Subject=
; ******* E-Mail Body
E-Mail Body=
; ******* Source Archive
Source Archive Folder=
; ******* Target Archive
Target Archive Folder=
; ******* values for Smart Archive: (0=No) (1=Yes)
Smart Archive=0
; ******* values for Move Files To Archive: (0=No) (1=Yes)
Move Files To Archive=0
; ******* values for Archive Conflicts Only: (0=No) (1=Yes)
Archive Conflicts Only=0
Num. Copies=0
Remove Days=0
Append Path=0
Max Archive Size=0
DES=0
; *******
ComEnc String=
[Filters]
; ******* values for Exclude Hidden Files: (0=No) (1=Yes)
Exclude Hidden Files=0
; ******* values for Exclude System Files: (0=No) (1=Yes)
Exclude System Files=0
; ******* values for Exclude Read-Only Files: (0=No) (1=Yes)
Exclude Read-Only Files=0
; *******
Exclude After Date=
; *******
Exclude Before Date=
Exclude Days Ago=0
Exclude Greater than bytes=0
Exclude Smaller than bytes=0
Num. of Filters=12
Filter 0=Exclude
Filter 1=D:\ProgramData\RoboForm\license.rfo
Filter 2=
Filter 3=Exclude
Filter 4=D:\ProgramData\RoboForm\cache.rfo
Filter 5=
Filter 6=Exclude
Filter 7=D:\ProgramData\RoboForm\RoboForm Pro Activation.rfp
Filter 8=
Filter 9=Exclude
Filter 10=D:\ProgramData\RoboForm\mru.rfo
Filter 11=
[FiltersDirs]
Num. of Filters=0
[ArchiveFilters]
Num. of Filters=0
[Subfolder Filters]
; ******* values for Exclude Empty Subfolders: (0=No) (1=Yes)
Exclude Empty Subfolders=0
; ******* values for Exclude Hidden Subfolders: (0=No) (1=Yes)
Exclude Hidden Subfolders=0
; ******* values for Exclude System Subfolders: (0=No) (1=Yes)
Exclude System Subfolders=0
; ******* values for Exclude Read-Only Subfolders: (0=No) (1=Yes)
Exclude Read-Only Subfolders=0
[No Rescan Options]
; ******* values for No Rescan: (0= ) (1=Source) (2=Target)
No Rescan=2
Force Rescan Hours=0
; ******* Force Rescan Condition
Force Rescan Condition=
[ViceVersa Profile - File Version 5.0.0]
[ViceVersa Profile - File Version 4.0.0]

------------- Source B - Milan --------------------
[Settings]
; ******* Source
Source Folder=C:\ProgramData\RoboForm\
; ******* Target
Target Folder=S:\RoboForm\
; ******* values for Lock Source: (0=No) (1=Yes)
Lock Source=0
; ******* values for Lock Target: (0=No) (1=Yes)
Lock Target=0
; ******* values for Continue even if sources/targets do not exist: (0=No) (1=Yes)
Continue even if sources/targets do not exist=0
; ******* values for Create sources/targets that do not exist: (0=No) (1=Yes)
Create sources/targets that do not exist=1
Connect to network with default user credentials=0
Connect to network with credentials=0
; *******
Connect network path=
; *******
Connect user=
; *******
Connect password=010101
Disconnect from network when done=0
; *******
Include Subfolders Flags=1
; ******* values for Comparison Type: (0=Size and Timestamp) (1=CRC) (2=Both)
Comparison Type=0
; ******* values for Ignore 2 seconds difference: (0=No) (1=Yes)
Ignore 2 seconds difference=0
; ******* values for Ignore any second difference: (0=No) (1=Yes)
Ignore any second difference=1
; ******* values for Ignore 1 hour difference: (0=No) (1=Yes)
Ignore 1 hour difference=0
CRC Chunk Size in Bytes=0
; ******* values for Ignore File Size: (0=No) (1=Yes)
Ignore File Size=0
; ******* values for Ignore Timestamp: (0=No) (1=Yes)
Ignore Timestamp=0
; ******* Specify file extensions, separated by comma (example *.mdf, *.ind)
Files with these extensions are always newer in source=
; ******* values for Execution Method: (0= ) (1=Synchronization) (2=Backup (Mirror Source to Target)) (3=Replication (Augment Target)) (4=Replication (Refresh Target)) (5=Replication (Update Target)) (6=Consolidation)
Execution Method=1
; ******* values for UnatSync: (0=No) (1=Yes)
UnatSync=0
Copy File Permissions=1
Copy File/Folder Permissions=1
Copy File/Folder Auditing=0
Copy File/Folder Owner=0
Do Not Copy File/Folder Data Streams=0
Use Volume Shadow Copy=1
; ******* values for Use Volume Shadow Copy For: (0=Source) (1=Target) (2=Both)
Use Volume Shadow Copy For=0
; ******* values for Create Volume Shadow Copy before comparing source and target: (0=No) (1=Yes)
Create Volume Shadow Copy before comparing source and target=0
; ******* values for Volume Shadow Copy log level: (0=Standard) (1=Detailed)
Volume Shadow Copy log level=0
; ******* values for No empty source/target check: (0=No) (1=Yes)
No empty source/target check=0
; ******* values for Retain folder timestamps: (0=No) (1=Yes)
Retain folder timestamps=0
; ******* values for Retain Windows EFS encryption: (0=No) (1=Yes)
Retain Windows EFS encryption=0
; ******* values for Retain Windows NTFS compression: (0=No) (1=Yes)
Retain Windows NTFS compression=0
; ******* values for Replace newer target files with older source files (backup only): (0=No) (1=Yes)
Replace newer target files with older source files (backup only)=0
Speed=100
Copy Buffer=32768
Flush Buffer=0
Use Windows Native File Copy=1
Unbuffered File Copy=0
Network Friendly Scanning=1
; ******* Log File
Log File=C:\ProgramData\ViceVersa PRO\Logs\VVlog-SynchRobo.log
; ******* values for Empty Log: (0=No) (1=Yes)
Empty Log=1
Log File Size=10000
; ******* values for Log Only Summary and Exceptions: (0=No) (1=Yes)
Log Only Summary and Exceptions=1
; ******* values for Monitor Conflicts: (0=No) (1=Yes)
Monitor Conflicts=1
; ******* values for Tracking Database Enabled: (0=No) (1=Yes)
Tracking Database Enabled=1
; ******* Sync Tracking Database
Sync Tracking Database=C:\ProgramData\ViceVersa PRO\TrackingDB\milan-SynchR.tdb
Sync Conflicts=1
Sync One-Way Source to Target Only=0
; ******* values for SCT: (0=No) (1=Yes)
SCT=1
; ******* values for NSC: (0=No) (1=Yes)
NSC=0
Source-Target Offset=0
; ******* values for Try Copy In Use Files: (0=No) (1=Yes)
Try Copy In Use Files=0
; ******* values for Skip In Use Files: (0=No) (1=Yes)
Skip In Use Files=0
; ******* values for Always Verify CRC: (0=No) (1=Yes)
Always Verify CRC=0
; ******* values for Priority Class: (0=Default) (1=Idle) (2=Low) (3=Below Normal) (4=Normal) (5=Above Normal) (6=High) (7=Realtime)
Priority Class=5
; ******* values for Limit Bandwidth: (0=No) (1=Yes)
Limit Bandwidth=0
Bandwidth Value=5
; ******* values for Bandwidth Unit: (0=KB/Sec) (1=MB/Sec)
Bandwidth Unit=1
; ******* values for Scripts Before: (0=No) (1=Yes)
Scripts Before=0
; ******* values for Scripts Before Comparison Global: (0=No) (1=Yes)
Scripts Before Comparison Global=0
; ******* values for Scripts Before Comparison Local: (0=No) (1=Yes)
Scripts Before Comparison Local=0
; ******* values for Scripts Before Comparison Specify: (0=No) (1=Yes)
Scripts Before Comparison Specify=0
; ******* Script to run before comparison
Script Before Comparison Path=
; ******* values for Scripts After: (0=No) (1=Yes)
Scripts After=0
; ******* values for Scripts After Execution Global: (0=No) (1=Yes)
Scripts After Execution Global=0
; ******* values for Scripts After Execution Local: (0=No) (1=Yes)
Scripts After Execution Local=0
; ******* values for Scripts After Execution Specify: (0=No) (1=Yes)
Scripts After Execution Specify=0
; ******* Script to run after execution
Script After Execution Path=
; ******* values for Send E-Mail on Error: (0=No) (1=Yes)
Send E-Mail on Error=1
; ******* values for Send E-Mail on Success: (0=No) (1=Yes)
Send E-Mail on Success=0
; *******
Send E-Mail on Error Condition=
; *******
Send E-Mail on Success Condition=
; ******* E-Mail address to send E-Mail TO
Send E-Mail - TO=misterjmm@gmail.com
; ******* E-Mail address to send E-Mail FROM
Send E-Mail - FROM=jasmoo.1940@gmail.com
; ******* SMTP Server Name
Send E-Mail - SMTP Server Name=smtp.gmail.com
Send E-Mail - Port=587
; ******* values for Send E-Mail - Authenticate using Name and Password: (0=No) (1=Yes)
Send E-Mail - Authenticate using Name and Password=1
; ******* User Name
Send E-Mail - User Name=jasmoo.1940
; ******* User Password
Send E-Mail - Password=(removed)
; ******* values for Send E-Mail - Use Secure Connection: (0=No) (1=Yes)
Send E-Mail - Use Secure Connection=1
; ******* values for POP3 Authenticate using Name and Password: (0=No) (1=Yes)
POP3 Authenticate using Name and Password=0
; ******* POP3 Server Name
POP3 Server Name=pop.gmail.com
POP3 Port=995
; ******* E-Mail Subject
E-Mail Subject=
; ******* E-Mail Body
E-Mail Body=
; ******* Source Archive
Source Archive Folder=
; ******* Target Archive
Target Archive Folder=
; ******* values for Smart Archive: (0=No) (1=Yes)
Smart Archive=0
; ******* values for Move Files To Archive: (0=No) (1=Yes)
Move Files To Archive=0
; ******* values for Archive Conflicts Only: (0=No) (1=Yes)
Archive Conflicts Only=0
Num. Copies=0
Remove Days=0
Append Path=0
Max Archive Size=0
DES=0
; *******
ComEnc String=
[Filters]
; ******* values for Exclude Hidden Files: (0=No) (1=Yes)
Exclude Hidden Files=0
; ******* values for Exclude System Files: (0=No) (1=Yes)
Exclude System Files=0
; ******* values for Exclude Read-Only Files: (0=No) (1=Yes)
Exclude Read-Only Files=0
; *******
Exclude After Date=
; *******
Exclude Before Date=
Exclude Days Ago=0
Exclude Greater than bytes=0
Exclude Smaller than bytes=0
Num. of Filters=12
Filter 0=Exclude
Filter 1=C:\ProgramData\RoboForm\license.rfo
Filter 2=
Filter 3=Exclude
Filter 4=C:\ProgramData\RoboForm\mru.rfo
Filter 5=
Filter 6=Exclude
Filter 7=C:\ProgramData\RoboForm\cache.rfo
Filter 8=
Filter 9=Exclude
Filter 10=C:\ProgramData\RoboForm\RoboForm Activation.rfp
Filter 11=
[FiltersDirs]
Num. of Filters=0
[ArchiveFilters]
Num. of Filters=0
[Subfolder Filters]
; ******* values for Exclude Empty Subfolders: (0=No) (1=Yes)
Exclude Empty Subfolders=0
; ******* values for Exclude Hidden Subfolders: (0=No) (1=Yes)
Exclude Hidden Subfolders=0
; ******* values for Exclude System Subfolders: (0=No) (1=Yes)
Exclude System Subfolders=0
; ******* values for Exclude Read-Only Subfolders: (0=No) (1=Yes)
Exclude Read-Only Subfolders=0
[No Rescan Options]
; ******* values for No Rescan: (0= ) (1=Source) (2=Target)
No Rescan=2
Force Rescan Hours=0
; ******* Force Rescan Condition
Force Rescan Condition=
[ViceVersa Profile - File Version 5.0.0]
[ViceVersa Profile - File Version 4.0.0]
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8758

PostPosted: Fri May 29, 2015 12:58 am    Post subject: Reply with quote

Thanks, you have set the profiles to "no rescan target", so the changes on target are not analyzed. The option is in profile settings -> performance - no rescan options. If you disable that option, then changes will be found. thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
jasmoo



Joined: 20 Jan 2013
Posts: 20

PostPosted: Fri May 29, 2015 5:47 am    Post subject: Reply with quote

I figured out the way to turn off No-Scan and it seems to work now. Thanks for reorienting me.

I have a suggestion: instead of blank in the drop-down list use None or similar. Also use None as the default. And perhaps include a brief remark in the No-Scan help page.

Of course then we have a double negative which is confusing. Perhaps the whole thing could be rephrased as Scan Options instead of No Scan Options. The options then might be: Default, Not-Source, Not-Target. Or some such.

Regards


.
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8758

PostPosted: Fri May 29, 2015 12:18 pm    Post subject: Reply with quote

Thanks, yes, it is blank by default, you can try by selecting New Profile from the File menu and start from a blank profile. thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Support All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © phpBB Group
Copyright © TGRMN Software. TGRMN Software products: