Forum Index  ViceVersa HOME         FAQ and Knowledge Base

 FAQForum FAQ   SearchSearch Forum  RegisterRegister 
 ProfileProfile   Log inLog in 

Target folder not found... again
Goto page 1, 2, 3  Next
 
Post new topic   Reply to topic     Forum Index -> Support
Author Message
raistlin295



Joined: 21 May 2014
Posts: 51

PostPosted: Mon Dec 29, 2014 2:01 pm    Post subject: Target folder not found... again Reply with quote

VV works perfectly and finds both source and target folders when run.

The source and target shares are both on the same NAS, located on different physical disks within the NAS.

When using VVE, I get the error "Target folder not found"

I followed the diagnosis provided and used both mapped and UNC descriptors for the folders and it makes no difference. I do not use VV as a service.

I have also told ViceVersa the username and password credentials for the NAS which then means that when I use "TEST" the system cannot find the NAS. When I use default credentials or no credentials, VV finds the NAS no problem

Please can anybody point me in the right direction?

Thank you.
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8758

PostPosted: Tue Dec 30, 2014 2:02 am    Post subject: Reply with quote

Hi, when you setup the mapped drive to the NAS in Windows, do you provide user name and password?
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
raistlin295



Joined: 21 May 2014
Posts: 51

PostPosted: Tue Dec 30, 2014 9:47 am    Post subject: Reply with quote

TGRMN Software wrote:
Hi, when you setup the mapped drive to the NAS in Windows, do you provide user name and password?


Thank you for your reply Smile

I have tried the username and password for the NAS. I put it in the "Network" part of the VV profile. Is that what you mean?
Back to top
raistlin295



Joined: 21 May 2014
Posts: 51

PostPosted: Sun Jan 04, 2015 4:24 pm    Post subject: Reply with quote

Hi - Please can somebody help?
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8758

PostPosted: Mon Jan 05, 2015 12:26 pm    Post subject: Reply with quote

Hi, yes, usually you enter user and password in the profile settings and it works. Do you get extra info on why the target folder is not found? thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
Guest






PostPosted: Mon Jan 05, 2015 12:44 pm    Post subject: Reply with quote

No,

It just says "Target not found".
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8758

PostPosted: Mon Jan 05, 2015 12:47 pm    Post subject: Reply with quote

Hi, when you click on "Test Connection" in the profile network settings and it fails, what error message is shown? thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
Guest






PostPosted: Mon Jan 05, 2015 1:12 pm    Post subject: Reply with quote

TGRMN Software wrote:
Hi, when you click on "Test Connection" in the profile network settings and it fails, what error message is shown? thanks


I'll try that when I get home from work and let you know.
Back to top
raistlin295



Joined: 21 May 2014
Posts: 51

PostPosted: Mon Jan 05, 2015 6:42 pm    Post subject: Reply with quote

OK,

Problem solved from a different direction Smile

I needed to "take ownership" of the folder I'm using as the mapped target drive by running a registry edit file and then ensure that there were no attributes.

Don't particularly understand it but it has worked Smile
Back to top
raistlin295



Joined: 21 May 2014
Posts: 51

PostPosted: Tue Jan 06, 2015 6:19 pm    Post subject: Reply with quote

I spoke too soon Sad

Same fault is back.

When I try the network test it says "not accessible"

I'm getting worried now. Please advise further?
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8758

PostPosted: Wed Jan 07, 2015 8:23 am    Post subject: Reply with quote

Try right-clicking on the ViceVersa program icon and select "Run as administrator". Then enter the network credentials in the profile settings and click on 'Test Connection'. Still same error given? thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
raistlin295



Joined: 21 May 2014
Posts: 51

PostPosted: Wed Jan 07, 2015 10:05 am    Post subject: Reply with quote

OK - Thank you. I will try when i get home from work.

Something maybe to think about. I have three profiles and this is the only one that causes problems.
Back to top
micornelius



Joined: 07 Jan 2015
Posts: 3

PostPosted: Wed Jan 07, 2015 5:49 pm    Post subject: Reply with quote

Hi I am having the same problem. Have tried running as adminstrator as suggested but no change. I don't understand why a Profile which works in VVPro fails when run in VVEngine?
Back to top
raistlin295



Joined: 21 May 2014
Posts: 51

PostPosted: Wed Jan 07, 2015 6:05 pm    Post subject: Reply with quote

Hi,

Same error when running as Administrator.

I'm definitely confused as to why only one of three profiles would have this problem?
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8758

PostPosted: Thu Jan 08, 2015 6:31 am    Post subject: Reply with quote

Do the other profiles that are working access the same source / target folders? thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Support All times are GMT
Goto page 1, 2, 3  Next
Page 1 of 3

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © phpBB Group
Copyright © TGRMN Software. TGRMN Software products: