Target folder not found... again

[TGRMN Software]

Both accessible to VV Pro also if VV Pro is "running as administrator"? Right click on ViceVersa and select "run as administrator" thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com

[raistlin295]

Doing that, now VV Pro can't see the folders either.

[TGRMN Software]

I assume that if you run NotePad as administrator too it also can't access / save files to those same folders?

Do you need a user + password to access the two NASs? Maybe you are only logged in for standard user and not admin.
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com

[raistlin295]

No, there is only one password for either NAS.

Again, my concern in this is that the other profiles seem to work perfectly?

[TGRMN Software]

OK, can you confirm that if you run NotePad as administrator too it also can't access / save files to those same folders? That would exclude ViceVersa/VVEngine as an issue and make it permission issue.

If it is a permission issue, pls try this:

http://forum.synology.com/wiki/index.php/Tips_and_common_error_messages_for_Windows_when_mapping_a_network_drive

thanks
---
www.tgrmn.com
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com

[raistlin295]

Hi,

Sorry I forgot to mention in my last post:-

Notepad, running as admin, CAN access both the test folders with no problem.

[TGRMN Software]

Now I am perplexed about this!
All other programs can access the folders when running as administrator but not ViceVersa? Can you check a few more programs just to be sure?
Also please post the profile file .fsf (it's a text file so you can copy and paste).

thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com

[raistlin295]

All else seems to have no problem accessing the folders.

Profile text:-

[Settings]
; ******* Source
Source Folder=\\NSA325-V2\video\Movies Plus\
; ******* Target
Target Folder=\\NSA325-V2\Volume2\moviesplus\Movies Plus Backup\
; ******* values for Lock Source: (0=No) (1=Yes)
Lock Source=0
; ******* values for Lock Target: (0=No) (1=Yes)
Lock Target=0
; ******* values for Continue even if sources/targets do not exist: (0=No) (1=Yes)
Continue even if sources/targets do not exist=0
; ******* values for Create sources/targets that do not exist: (0=No) (1=Yes)
Create sources/targets that do not exist=1
Connect to network with default user credentials=0
Connect to network with credentials=0
; *******
Connect network path=\\NSA325-V2\Volume2\moviesplus\
; *******
Connect user=admin
; *******
Connect password=010101
Disconnect from network when done=0
; *******
Include Subfolders Flags=1
; ******* values for Comparison Type: (0=Size and Timestamp) (1=CRC) (2=Both)
Comparison Type=0
; ******* values for Ignore 2 seconds difference: (0=No) (1=Yes)
Ignore 2 seconds difference=0
; ******* values for Ignore any second difference: (0=No) (1=Yes)
Ignore any second difference=0
; ******* values for Ignore 1 hour difference: (0=No) (1=Yes)
Ignore 1 hour difference=0
CRC Chunk Size in Bytes=0
; ******* values for Ignore File Size: (0=No) (1=Yes)
Ignore File Size=0
; ******* values for Ignore Timestamp: (0=No) (1=Yes)
Ignore Timestamp=0
; ******* Specify file extensions, separated by comma (example *.mdf, *.ind)
Files with these extensions are always newer in source=
; ******* values for Execution Method: (0= ) (1=Synchronization) (2=Backup (Mirror Source to Target)) (3=Replication (Augment Target)) (4=Replication (Refresh Target)) (5=Replication (Update Target)) (6=Consolidation)
Execution Method=2
; ******* values for UnatSync: (0=No) (1=Yes)
UnatSync=0
Copy File Permissions=0
Copy File/Folder Permissions=1
Copy File/Folder Auditing=0
Copy File/Folder Owner=0
Do Not Copy File/Folder Data Streams=0
Use Volume Shadow Copy=0
; ******* values for Use Volume Shadow Copy For: (0=Source) (1=Target) (2=Both)
Use Volume Shadow Copy For=0
; ******* values for Create Volume Shadow Copy before comparing source and target: (0=No) (1=Yes)
Create Volume Shadow Copy before comparing source and target=0
; ******* values for Volume Shadow Copy log level: (0=Standard) (1=Detailed)
Volume Shadow Copy log level=0
; ******* values for No empty source/target check: (0=No) (1=Yes)
No empty source/target check=0
; ******* values for Retain folder timestamps: (0=No) (1=Yes)
Retain folder timestamps=0
; ******* values for Retain Windows EFS encryption: (0=No) (1=Yes)
Retain Windows EFS encryption=0
; ******* values for Retain Windows NTFS compression: (0=No) (1=Yes)
Retain Windows NTFS compression=0
; ******* values for Replace newer target files with older source files (backup only): (0=No) (1=Yes)
Replace newer target files with older source files (backup only)=0
Speed=100
Copy Buffer=32768
Flush Buffer=0
Use Windows Native File Copy=0
Unbuffered File Copy=0
Network Friendly Scanning=0
; ******* Log File
Log File=
; ******* values for Empty Log: (0=No) (1=Yes)
Empty Log=0
Log File Size=0
; ******* values for Log Only Summary and Exceptions: (0=No) (1=Yes)
Log Only Summary and Exceptions=0
; ******* values for Monitor Conflicts: (0=No) (1=Yes)
Monitor Conflicts=0
; ******* values for Tracking Database Enabled: (0=No) (1=Yes)
Tracking Database Enabled=0
; ******* Sync Tracking Database
Sync Tracking Database=
Sync Conflicts=0
Sync One-Way Source to Target Only=0
; ******* values for SCT: (0=No) (1=Yes)
SCT=0
; ******* values for NSC: (0=No) (1=Yes)
NSC=0
Source-Target Offset=0
; ******* values for Try Copy In Use Files: (0=No) (1=Yes)
Try Copy In Use Files=1
; ******* values for Skip In Use Files: (0=No) (1=Yes)
Skip In Use Files=0
; ******* values for Always Verify CRC: (0=No) (1=Yes)
Always Verify CRC=0
; ******* values for Priority Class: (0=Default) (1=Idle) (2=Low) (3=Below Normal) (4=Normal) (5=Above Normal) (6=High) (7=Realtime)
Priority Class=0
; ******* values for Limit Bandwidth: (0=No) (1=Yes)
Limit Bandwidth=0
Bandwidth Value=0
; ******* values for Bandwidth Unit: (0=KB/Sec) (1=MB/Sec)
Bandwidth Unit=1
; ******* values for Scripts Before: (0=No) (1=Yes)
Scripts Before=0
; ******* values for Scripts Before Comparison Global: (0=No) (1=Yes)
Scripts Before Comparison Global=0
; ******* values for Scripts Before Comparison Local: (0=No) (1=Yes)
Scripts Before Comparison Local=0
; ******* values for Scripts Before Comparison Specify: (0=No) (1=Yes)
Scripts Before Comparison Specify=0
; ******* Script to run before comparison
Script Before Comparison Path=
; ******* values for Scripts After: (0=No) (1=Yes)
Scripts After=0
; ******* values for Scripts After Execution Global: (0=No) (1=Yes)
Scripts After Execution Global=0
; ******* values for Scripts After Execution Local: (0=No) (1=Yes)
Scripts After Execution Local=0
; ******* values for Scripts After Execution Specify: (0=No) (1=Yes)
Scripts After Execution Specify=0
; ******* Script to run after execution
Script After Execution Path=
; ******* values for Send E-Mail on Error: (0=No) (1=Yes)
Send E-Mail on Error=0
; ******* values for Send E-Mail on Success: (0=No) (1=Yes)
Send E-Mail on Success=0
; *******
Send E-Mail on Error Condition=
; *******
Send E-Mail on Success Condition=
; ******* E-Mail address to send E-Mail TO
Send E-Mail - TO=
; ******* E-Mail address to send E-Mail FROM
Send E-Mail - FROM=
; ******* SMTP Server Name
Send E-Mail - SMTP Server Name=
Send E-Mail - Port=0
; ******* values for Send E-Mail - Authenticate using Name and Password: (0=No) (1=Yes)
Send E-Mail - Authenticate using Name and Password=0
; ******* User Name
Send E-Mail - User Name=
; ******* User Password
Send E-Mail - Password=010101
; ******* values for Send E-Mail - Use Secure Connection: (0=No) (1=Yes)
Send E-Mail - Use Secure Connection=0
; ******* values for POP3 Authenticate using Name and Password: (0=No) (1=Yes)
POP3 Authenticate using Name and Password=0
; ******* POP3 Server Name
POP3 Server Name=
POP3 Port=0
; ******* E-Mail Subject
E-Mail Subject=
; ******* E-Mail Body
E-Mail Body=
; ******* Source Archive
Source Archive Folder=
; ******* Target Archive
Target Archive Folder=
; ******* values for Smart Archive: (0=No) (1=Yes)
Smart Archive=0
; ******* values for Move Files To Archive: (0=No) (1=Yes)
Move Files To Archive=0
; ******* values for Archive Conflicts Only: (0=No) (1=Yes)
Archive Conflicts Only=0
Num. Copies=0
Remove Days=0
Append Path=0
Max Archive Size=0
DES=0
; *******
ComEnc String=000000
[Filters]
; ******* values for Exclude Hidden Files: (0=No) (1=Yes)
Exclude Hidden Files=0
; ******* values for Exclude System Files: (0=No) (1=Yes)
Exclude System Files=0
; ******* values for Exclude Read-Only Files: (0=No) (1=Yes)
Exclude Read-Only Files=0
; *******
Exclude After Date=
; *******
Exclude Before Date=
Exclude Days Ago=0
Exclude Greater than bytes=0
Exclude Smaller than bytes=0
Num. of Filters=0
[FiltersDirs]
Num. of Filters=0
[ArchiveFilters]
Num. of Filters=0
[Subfolder Filters]
; ******* values for Exclude Empty Subfolders: (0=No) (1=Yes)
Exclude Empty Subfolders=0
; ******* values for Exclude Hidden Subfolders: (0=No) (1=Yes)
Exclude Hidden Subfolders=0
; ******* values for Exclude System Subfolders: (0=No) (1=Yes)
Exclude System Subfolders=0
; ******* values for Exclude Read-Only Subfolders: (0=No) (1=Yes)
Exclude Read-Only Subfolders=0
[No Rescan Options]
; ******* values for No Rescan: (0= ) (1=Source) (2=Target)
No Rescan=0
Force Rescan Hours=0
; ******* Force Rescan Condition
Force Rescan Condition=
[ViceVersa Profile - File Version 5.0.0]
[ViceVersa Profile - File Version 4.0.0]

[TGRMN Software]

Thanks. I reviewed the settings.

a) you are connecting with admin:
Connect user=admin
Connect password=010101 ( <- this is encrypted not the real pwd)

Please try without any network info in the profile settings, running as admin and as standard in ViceVersa.

b) Is the connect passorwd you are using right now empty ?

thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com

[raistlin295]

No settings selected in Network, neither default nor specific.

Therefore no password given.

VV Pro finds the folders as a normal user but not when VV Pro is opened with admin rights.


Still the same problem. It only goes away when I select UAC settings to the lowest setting.

[raistlin295]

Hi,

This seems to have stalled recently?

[TGRMN Software]

Running out of ideas... maybe should try to do a remote session? thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com

[raistlin295]