Author |
Message |
Srivathsa Guest
|
Posted: Wed Aug 15, 2012 10:10 am Post subject: Problem with file filters |
|
|
Hello,
I am facing a problem with applying filters to files. I have applied the filters but the changes are not detected. The following is the exact scenario.
I am using VisualBuildPRO 2.5. I have a profile with multiple source targets. My method of execution is backup(mirror source to target). I have file filters set according to the source target pair. Eg: the source target pair is D:\test\ <to> E:\test\ and file filter for this is <include> <1>*.doc .
The problem is when i change something in the source the execution starts, which means VV detects the change but says no file change is detected. So I am confused if my filters are correct. When I remove the filters, everything works fine. Could you please give me a precise example to do the file filters? Should I exclude everything and only then include? Thanks!
I am using VVLauncher |
|
Back to top |
|
|
Srivathsa Guest
|
Posted: Wed Aug 15, 2012 10:18 am Post subject: |
|
|
[Settings]
; ******* Source
Source Folder=D:\Database\ | D:\User\ | D:\Runtime\ | D:\Features\
; ******* Target
Target Folder=\\192.168.200.96\Database\ | \\192.168.200.96\User\ | \Runtime\ | \\192.168.200.96\Features\
; ******* values for Lock Source: (0=No) (1=Yes)
Lock Source=1
; ******* values for Lock Target: (0=No) (1=Yes)
Lock Target=0
; ******* values for Continue even if sources/targets do not exist: (0=No) (1=Yes)
Continue even if sources/targets do not exist=0
; ******* values for Create sources/targets that do not exist: (0=No) (1=Yes)
Create sources/targets that do not exist=1
Connect to network with default user credentials=0
Connect to network with credentials=1
; *******
Connect network path=\\192.168.200.96\ViceVersaTest\
; *******
Connect user=
; *******
Connect password
Disconnect from network when done=0
; *******
Include Subfolders Flags=1|1|1|1
; ******* values for Comparison Type: (0=Size and Timestamp) (1=CRC) (2=Both)
Comparison Type=0
; ******* values for Ignore 2 seconds difference: (0=No) (1=Yes)
Ignore 2 seconds difference=0
; ******* values for Ignore any second difference: (0=No) (1=Yes)
Ignore any second difference=0
; ******* values for Ignore 1 hour difference: (0=No) (1=Yes)
Ignore 1 hour difference=0
CRC Chunk Size in Bytes=0
; ******* values for Ignore File Size: (0=No) (1=Yes)
Ignore File Size=0
; ******* values for Ignore Timestamp: (0=No) (1=Yes)
Ignore Timestamp=0
; ******* Specify file extensions, separated by comma (example *.mdf, *.ind)
Files with these extensions are always newer in source=
; ******* values for Execution Method: (0= ) (1=Synchronization) (2=Backup (Mirror Source to Target)) (3=Replication (Augment Target)) (4=Replication (Refresh Target)) (5=Replication (Update Target)) (6=Consolidation)
Execution Method=2
; ******* values for UnatSync: (0=No) (1=Yes)
UnatSync=0
Copy File Permissions=1
Copy File/Folder Permissions=1
Copy File/Folder Auditing=0
Copy File/Folder Owner=0
Do Not Copy File/Folder Data Streams=0
Use Volume Shadow Copy=1
; ******* values for Use Volume Shadow Copy For: (0=Source) (1=Target) (2=Both)
Use Volume Shadow Copy For=0
; ******* values for Create Volume Shadow Copy before comparing source and target: (0=No) (1=Yes)
Create Volume Shadow Copy before comparing source and target=0
; ******* values for Volume Shadow Copy log level: (0=Standard) (1=Detailed)
Volume Shadow Copy log level=0
; ******* values for No empty source/target check: (0=No) (1=Yes)
No empty source/target check=0
; ******* values for Replace newer target files with older source files (backup only): (0=No) (1=Yes)
Replace newer target files with older source files (backup only)=0
Speed=100
Copy Buffer=32768
Flush Buffer=0
Use Windows Native File Copy=0
Unbuffered File Copy=0
Network Friendly Scanning=0
; ******* Log File
Log File=C:\Users\Sharish\Documents\ViceVersa PRO\AutoDrLog.log
; ******* values for Empty Log: (0=No) (1=Yes)
Empty Log=0
Log File Size=10000
; ******* values for Log Only Summary and Exceptions: (0=No) (1=Yes)
Log Only Summary and Exceptions=0
; ******* values for Monitor Conflicts: (0=No) (1=Yes)
Monitor Conflicts=0
; ******* values for Tracking Database Enabled: (0=No) (1=Yes)
Tracking Database Enabled=0
; ******* Sync Tracking Database
Sync Tracking Database=C:\ProgramData\ViceVersa PRO\vvdb2.tdb
Sync Conflicts=0
Sync One-Way Source to Target Only=0
; ******* values for SCT: (0=No) (1=Yes)
SCT=1
; ******* values for NSC: (0=No) (1=Yes)
NSC=0
Source-Target Offset=0
; ******* values for Try Copy In Use Files: (0=No) (1=Yes)
Try Copy In Use Files=0
; ******* values for Skip In Use Files: (0=No) (1=Yes)
Skip In Use Files=0
; ******* values for Always Verify CRC: (0=No) (1=Yes)
Always Verify CRC=0
; ******* values for Priority Class: (0=Default) (1=Idle) (2=Low) (3=Below Normal) (4=Normal) (5=Above Normal) (6=High) (7=Realtime)
Priority Class=0
; ******* values for Limit Bandwidth: (0=No) (1=Yes)
Limit Bandwidth=0
Bandwidth Value=5
; ******* values for Bandwidth Unit: (0=KB/Sec) (1=MB/Sec)
Bandwidth Unit=1
; ******* values for Scripts Before: (0=No) (1=Yes)
Scripts Before=0
; ******* values for Scripts Before Comparison Global: (0=No) (1=Yes)
Scripts Before Comparison Global=0
; ******* values for Scripts Before Comparison Local: (0=No) (1=Yes)
Scripts Before Comparison Local=0
; ******* values for Scripts Before Comparison Specify: (0=No) (1=Yes)
Scripts Before Comparison Specify=0
; ******* Script to run before comparison
Script Before Comparison Path=
; ******* values for Scripts After: (0=No) (1=Yes)
Scripts After=0
; ******* values for Scripts After Execution Global: (0=No) (1=Yes)
Scripts After Execution Global=0
; ******* values for Scripts After Execution Local: (0=No) (1=Yes)
Scripts After Execution Local=0
; ******* values for Scripts After Execution Specify: (0=No) (1=Yes)
Scripts After Execution Specify=0
; ******* Script to run after execution
Script After Execution Path=
; ******* values for Send E-Mail on Error: (0=No) (1=Yes)
Send E-Mail on Error=0
; ******* values for Send E-Mail on Success: (0=No) (1=Yes)
Send E-Mail on Success=0
; *******
Send E-Mail on Error Condition=
; *******
Send E-Mail on Success Condition=
; ******* E-Mail address to send E-Mail TO
Send E-Mail - TO=
; ******* E-Mail address to send E-Mail FROM
Send E-Mail - FROM=
; ******* SMTP Server Name
Send E-Mail - SMTP Server Name=
Send E-Mail - Port=0
; ******* values for Send E-Mail - Authenticate using Name and Password: (0=No) (1=Yes)
Send E-Mail - Authenticate using Name and Password=0
; ******* User Name
Send E-Mail - User Name=
; ******* User Password
Send E-Mail - Password=010101
; ******* values for Send E-Mail - Use Secure Connection: (0=No) (1=Yes)
Send E-Mail - Use Secure Connection=0
; ******* values for POP3 Authenticate using Name and Password: (0=No) (1=Yes)
POP3 Authenticate using Name and Password=0
; ******* POP3 Server Name
POP3 Server Name=
POP3 Port=0
; ******* E-Mail Subject
E-Mail Subject=
; ******* E-Mail Body
E-Mail Body=
; ******* Source Archive
Source Archive Folder=
; ******* Target Archive
Target Archive Folder=
; ******* values for Smart Archive: (0=No) (1=Yes)
Smart Archive=0
; ******* values for Move Files To Archive: (0=No) (1=Yes)
Move Files To Archive=0
; ******* values for Archive Conflicts Only: (0=No) (1=Yes)
Archive Conflicts Only=0
Num. Copies=0
Remove Days=0
Append Path=0
Max Archive Size=0
DES=0
; *******
ComEnc String=000000
[Filters]
; ******* values for Exclude Hidden Files: (0=No) (1=Yes)
Exclude Hidden Files=0
; ******* values for Exclude System Files: (0=No) (1=Yes)
Exclude System Files=0
; ******* values for Exclude Read-Only Files: (0=No) (1=Yes)
Exclude Read-Only Files=0
; *******
Exclude After Date=
; *******
Exclude Before Date=
Exclude Days Ago=0
Exclude Greater than bytes=0
Exclude Smaller than bytes=0
Num. of Filters=51
Filter 0=Exclude
Filter 1=<2>*.*
Filter 2=
Filter 3=Exclude
Filter 4=<1>*.*
Filter 5=
Filter 6=Exclude
Filter 7=<3>*.*
Filter 8=
Filter 9=Exclude
Filter 10=<4>*.*
Filter 11=
Filter 12=Include
Filter 13=<1>Recording.mdb
Filter 14=
Filter 15=Include
Filter 16=<1>CallPlus.mdb
Filter 17=
Filter 18=Include
Filter 19=<1>xfertem.dbf
Filter 20=
Filter 21=Include
Filter 22=<1>voicemail.dbf
Filter 23=
Filter 24=Include
Filter 25=<1>user.dbf
Filter 26=
Filter 27=Include
Filter 28=<1>qconfig.dbf
Filter 29=
Filter 30=Include
Filter 31=<1>agmember.dbf
Filter 32=
Filter 33=Include
Filter 34=<1>cc_agent.dbf
Filter 35=
Filter 36=Include
Filter 37=<1>cc_group.dbf
Filter 38=
Filter 39=Include
Filter 40=<1>cc_oct.dbf
Filter 41=
Filter 42=Include
Filter 43=<2>AgentLookup.csv
Filter 44=
Filter 45=Include
Filter 46=<2>directory.csv
Filter 47=
Filter 48=Include
Filter 49=<1>ics.xml
Filter 50=
[FiltersDirs]
Num. of Filters=27
Filter 0=Include
Filter 1=<1>QScript\
Filter 2=
Filter 3=Include
Filter 4=<1>Message\
Filter 5=
Filter 6=Include
Filter 7=<2>AText Projects\
Filter 8=
Filter 9=Include
Filter 10=<2>Prompts\
Filter 11=
Filter 12=Include
Filter 13=<2>Reports\
Filter 14=
Filter 15=Include
Filter 16=<3>AText Prompts\
Filter 17=
Filter 18=Include
Filter 19=<3>ADL Services\
Filter 20=
Filter 21=Include
Filter 22=<4>Data\
Filter 23=
Filter 24=Include
Filter 25=<4>Report\
Filter 26=
[ArchiveFilters]
Num. of Filters=0
[Subfolder Filters]
; ******* values for Exclude Empty Subfolders: (0=No) (1=Yes)
Exclude Empty Subfolders=0
; ******* values for Exclude Hidden Subfolders: (0=No) (1=Yes)
Exclude Hidden Subfolders=0
; ******* values for Exclude System Subfolders: (0=No) (1=Yes)
Exclude System Subfolders=0
; ******* values for Exclude Read-Only Subfolders: (0=No) (1=Yes)
Exclude Read-Only Subfolders=0
[No Rescan Options]
; ******* values for No Rescan: (0= ) (1=Source) (2=Target)
No Rescan=0
Force Rescan Hours=0
; ******* Force Rescan Condition
Force Rescan Condition=
[ViceVersa Profile - File Version 5.0.0]
[ViceVersa Profile - File Version 4.0.0]
This is my profile, might help to reason |
|
Back to top |
|
|
TGRMN Software Site Admin
Joined: 10 Jan 2005 Posts: 8759
|
Posted: Sat Aug 18, 2012 3:56 pm Post subject: |
|
|
Hi,
Quote: | The problem is when i change something in the source the execution starts, which means VV detects the change but says no file change is detected. So I am confused if my filters are correct. When I remove the filters, everything works fine. |
"... which means VV detects the change but says no file change is detected." Can you elaborate please on where it says no file change is detected?
thanks _________________ --
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com |
|
Back to top |
|
|
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © phpBB Group
|