Forum Index  ViceVersa HOME         FAQ and Knowledge Base

 FAQForum FAQ   SearchSearch Forum  RegisterRegister 
 ProfileProfile   Log inLog in 

vvengine

 
Post new topic   Reply to topic     Forum Index -> Support
Author Message
aries58net



Joined: 18 Nov 2008
Posts: 20
Location: Italy
PostPosted: Fri Oct 22, 2010 7:30 am    Post subject: vvengine Reply with quote
Sometime some profile in vvengine (VVengine Home) disable by itself . But didn't do nothing!! What could it be ? How can I prevent profiles by disabling by itself ?
_________________
Aries58net
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8759
PostPosted: Fri Oct 22, 2010 1:13 pm    Post subject: Reply with quote
Hello

please write to support@tgrmn.com , we'd like you to try the new VVEngine 2.0 if possible,

thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
aries58net



Joined: 18 Nov 2008
Posts: 20
Location: Italy
PostPosted: Mon Oct 25, 2010 1:35 pm    Post subject: Reply with quote
I wrote at your support but I did not get any answer!

By the way in this forum , accessible only by administrator , you say that vvengine 2.0 beta can be downloaded on the vvengine page; But in the vvengine page there is no trace of vvengine 2.0 ???? I'ts quite confusing here !!!!

P.S Does vvengine beta, once downloaded, run with vversa 2.5 build 2501 64 bit ?

please help me I've to keep the vvengine home page to make it run , that's not normal what can I do ? give me please the right link to download vvengine 2.0 beta !!
_________________
Aries58net
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8759
PostPosted: Tue Oct 26, 2010 4:35 am    Post subject: Reply with quote
Sorry for the delay, we are now sending you instructions via e-mail, thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
mlubbehusen



Joined: 02 Nov 2010
Posts: 4
PostPosted: Tue Nov 02, 2010 7:46 pm    Post subject: VV Engine not working on Server 2008 R2 - 64 bit Reply with quote
We used VV Engine for many years on our Win 2003 server and no problems. Ever since we migrated to 2008 R2 - 64 bit, the profiles never can never run properly and always have an error that it can not find the target on the remote side.

config is the VVEngine running on Win 2008 R2 and trying to sync with a server across the WAN. Fail to establish the connection every time.

When we run the profile manually, it kicks right off and works fine.

Is 2008 R2 not supported properly and authenticating incorrectly?

New version address this maybe?
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8759
PostPosted: Wed Nov 03, 2010 1:00 am    Post subject: Reply with quote
I think this is a network connectivity / authentication issue.

What scheduling settings are you using in VVEngine?
Are you using mapped drives?
Are you running VVEngine as service?
Under which account?
Is User Account Control enabled on the server?

thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
mlubbehusen



Joined: 02 Nov 2010
Posts: 4
PostPosted: Wed Nov 03, 2010 11:30 am    Post subject: Reply on VV Enginer issue Reply with quote
TGRMN Software wrote:
I think this is a network connectivity / authentication issue.

What scheduling settings are you using in VVEngine?
Are you using mapped drives?
Are you running VVEngine as service?
Under which account?
Is User Account Control enabled on the server?

thanks



Settings from VVE are below. We are using the full UNC paths to all sources and targets. There is a drive letter mapped to the root of the remote source on this machine for other uses. Engine is running as a service. VVEngine is running while logged in tot he local Administrator account on the server. UAC is turned off on this server and set to "Never Notify Me"



VVEngine Settings
HTTP Port: 8001
HTTP Clients Allowed from IPs: *
HTTP Password: Not active
HTTP Auto-Update Page: 5 secs
Settings Loaded/Saved to: C:\Users\administrator.PRIMARY\AppData\Roaming\VVEngine\VVEngine.xml
VVEngine Log File: C:\Users\administrator.PRIMARY\AppData\Roaming\VVEngine\VVEngine.log
VVEngine DB File: C:\Users\administrator.PRIMARY\AppData\Roaming\VVEngine\VVEngine.db
VVEngine Start Time: 10/29/2010 3:03:44 PM
VVEngine Version: VVEngine 1.1 (Build 7)
VVEngine Command Line: "C:\Program Files (x86)\VVEngine\vvengine.exe" /serv
VVEngine Max Profiles: Unlimited
ViceVersa Path: C:\Program Files\ViceVersa Pro 2\ViceVersa.exe
System: Windows Server 2008, (Datacenter Edition), (HyperV), (x86-64 Processor) v6.1 Build:7600 - Emulated OS: Windows Server 2008, (Datacenter Edition), (HyperV), (x86-32 Processor) v6.1 Build:7600
Account Name: PRIMARY.LOCAL\Administrator
Computer Name: AppFW1.primary.local
Service: Running as a Windows Service



Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8759
PostPosted: Wed Nov 03, 2010 11:58 am    Post subject: Reply with quote
Is the service running under the admin account or the local system account?
What scheduling options are you using for this profile?
thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
mlubbehusen



Joined: 02 Nov 2010
Posts: 4
PostPosted: Wed Nov 03, 2010 12:30 pm    Post subject: Reply with quote
TGRMN Software wrote:
Is the service running under the admin account or the local system account?
What scheduling options are you using for this profile?
thanks


I just checked and it is running as the Admin account.
Options for schedule are to run every night at specified time, retry every 5 minutes on fail.

Most recent attempt:
2010-11-03 08:27:07 : START ID: 201011312274-919531-3192
2010-11-03 08:27:07 : ************************************************************
2010-11-03 08:27:07 : Profile Started.
2010-11-03 08:27:07 : ************************************************************
2010-11-03 08:27:07 : Version: ViceVersa PRO 2.5 Build 2500 64-bit (SN219)
2010-11-03 08:27:07 : Command Line: "C:\Program Files\ViceVersa Pro 2\ViceVersa.exe" "C:\Users\files\Documents\ViceVersa PRO 2\vv-projects-sync-CM.fsf" /hiddenautosync /vveng
2010-11-03 08:27:07 : System: Windows Server 2008 R2, (Datacenter Edition), (64 Bit Edition), (HyperV), (x86-64 Processor) v6.1 Build:7600
2010-11-03 08:27:07 : User: PRIMARY.LOCAL\Administrator
2010-11-03 08:27:07 : Computer: AppFW1.primary.local
2010-11-03 08:27:07 : **** Profile: C:\Users\files\Documents\ViceVersa PRO 2\vv-projects-sync-CM.fsf
2010-11-03 08:27:07 : **** - Folders -
2010-11-03 08:27:07 : **** "\\primaryfw2\Projects\" <to> "\\primarycm1\Projects\" (Include Subfolders)
2010-11-03 08:27:07 : **** "\\primaryfw2\Business\" <to> "\\primarycm1\Business\" (Include Subfolders)
2010-11-03 08:27:07 : **** "\\primaryfw2\Marketing\" <to> "\\primarycm1\Marketing\" (Include Subfolders)
2010-11-03 08:27:07 : **** "\\primaryfw2\Proposals\" <to> "\\primarycm1\Proposals\" (Include Subfolders)
2010-11-03 08:27:07 : **** "\\primaryfw2\Monarch\" <to> "\\primarycm1\Monarch\" (Include Subfolders)
2010-11-03 08:27:07 : **** "\\primaryfw2\ftp\" <to> "\\primarycm1\FTP_Drive\" (Include Subfolders)
2010-11-03 08:27:07 : **** - Comparison Settings -
2010-11-03 08:27:07 : **** Comparison Type: Size and Timestamp
2010-11-03 08:27:07 : **** Ignore any second difference
2010-11-03 08:27:07 : **** - Execution Settings -
2010-11-03 08:27:07 : **** Method: Synchronization
2010-11-03 08:27:07 : **** No overwrite / read-only / error confirmations
2010-11-03 08:27:07 : **** Tracking Database: "C:\ProgramData\ViceVersa PRO 2\vvdb4.tdb" (synchronize/backup/replicate conflicts)
2010-11-03 08:27:07 : **** Log File: "C:\ProgramData\ViceVersa PRO 2\log4.log" (max 10000 KB)
2010-11-03 08:27:07 : **** No archive for deleted/replaced source files
2010-11-03 08:27:07 : **** No archive for deleted/replaced target files
2010-11-03 08:27:07 : **** Process Priority: Normal
2010-11-03 08:27:07 : **** Speed: 100 Buffer Size: 524288 (flush the buffer every write)
2010-11-03 08:27:17 : [ERROR] Target: folder "\\primarycm1\Projects\" not found.
2010-11-03 08:27:17 : Exit Code: 14. Target folder not found. [ERROR]
2010-11-03 08:27:17 : ************************************************************
2010-11-03 08:27:17 : END ID: 201011312274-919531-3192
[/img]
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8759
PostPosted: Wed Nov 03, 2010 12:39 pm    Post subject: Reply with quote
Try using the option:
"Connect using default user's credentials"
in profile settings -> folders -> network
thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
mlubbehusen



Joined: 02 Nov 2010
Posts: 4
PostPosted: Wed Nov 03, 2010 1:38 pm    Post subject: thanks Reply with quote
TGRMN Software wrote:
Try using the option:
"Connect using default user's credentials"
in profile settings -> folders -> network
thanks


Seems to have hit it. Thank you.
Back to top
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Support All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © phpBB Group
Copyright © TGRMN Software. TGRMN Software products:
· ViceVersa: Windows Backup Software, File Synchronization, File Replication
· Compare And Merge: File Compare Software for Windows