Forum Index  ViceVersa HOME         FAQ and Knowledge Base

 FAQForum FAQ   SearchSearch Forum  RegisterRegister 
 ProfileProfile   Log inLog in 

Unable to save or load profiles (revisited)

 
Post new topic   Reply to topic     Forum Index -> Support
Author Message
abouvv



Joined: 04 Jul 2010
Posts: 2

PostPosted: Sun Jul 04, 2010 3:59 am    Post subject: Unable to save or load profiles (revisited) Reply with quote

I have just bought a license to run ViceVersa Pro build 2.5.0.1 on a Desktop running Win98SE (I know, I know; it's old and all, but...) and on a laptop running Win Vista.

The problem I am running into appears on the Win98SE machine but not on the Win Vista. The problem being that I am unable to save or load profiles. When I try either function, I simply do not get either "Open" or "Save As" dialog boxes. However, if I create a profile on my Vista machine, then copy it to the Win98SE machine, I can modify and save the changes over the 'existing' profile.

The problem was addressed in two previous posts:
"http://www.tgrmn.com/web/forum/viewtopict840.htm"
and
"http://www.tgrmn.com/web/forum/viewtopict157.htm".
They both described my exact situation. On both my computers the "My documents" folder are too mapped to a drive, in my case "D:\".

The problem is said to have been fixed in versions subsequent to VVPro2 Build 2008. But I am still experiencing it or, at the vey least, something akin to it.

Thanks for taking the time to look into this.
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8759

PostPosted: Mon Jul 05, 2010 1:11 pm    Post subject: Reply with quote

Hello, unfortunately this is an issue that is still now present in Windows 98. Sad
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
abouvv



Joined: 04 Jul 2010
Posts: 2

PostPosted: Tue Jul 06, 2010 2:40 am    Post subject: How Disapointing! Reply with quote

I was afraid that was the case.

As much as I appreciate the quick reply, I find dispointing the fact that for all the reading I did on the TGRMN site, I didn't find any reference to this still existing issue. There should be a disclaimer associated with the statement indicating that the software is supported under Windows 98.

What I find even more disapoiting is the fact that I haven't found on the site any reference to a work-around solution I have stumbled upon.

As it would take some doing to do so, I won't post this workaround unless someone shows interest in it.

Having said all that, thanks again for the quick reply.
Back to top
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Support All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © phpBB Group
Copyright © TGRMN Software. TGRMN Software products: