Forum Index  ViceVersa HOME         FAQ and Knowledge Base

 FAQForum FAQ   SearchSearch Forum  RegisterRegister 
 ProfileProfile   Log inLog in 

VVPro telling me not enough drive space on target..
Goto page 1, 2  Next
 
Post new topic   Reply to topic     Forum Index -> Support
Author Message
guiri
Guest





PostPosted: Mon Jun 21, 2010 1:00 am    Post subject: VVPro telling me not enough drive space on target.. Reply with quote

I was trying to sync files by using the Replication/Augment Target option from an external drive connected to my PC to an unRaid server that I mentioned in my synch/moving thread a few days ago. It keeps telling me there's not enough space on the target but according to my calculations, there's roughly 1TB left and only 56 gigs are needed...

Any ideas?

Thanks

George
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8759

PostPosted: Mon Jun 21, 2010 12:47 pm    Post subject: Reply with quote

What's the size of the file you get this message for? thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
guiri



Joined: 21 Jun 2010
Posts: 28

PostPosted: Mon Jun 21, 2010 8:59 pm    Post subject: Reply with quote

196,000 files on roughly 29 gigs I think.

George
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8759

PostPosted: Tue Jun 22, 2010 2:07 am    Post subject: Reply with quote

Hello

can you please set a profile log (profile settings -> execution) and then send the entire log of a run with this error to support ?

thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
guiri



Joined: 21 Jun 2010
Posts: 28

PostPosted: Tue Jun 22, 2010 2:12 am    Post subject: Reply with quote

Okie dokie schmokie, I should be able to handle it.

Do you want me to finish running it? It's going to be a a lot of error messages but I have no problem with it.

Which address and attention to whom?

It'll be a few hours because it's still running some stuff..

Thanks

George
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8759

PostPosted: Tue Jun 22, 2010 2:31 am    Post subject: Reply with quote

Hello

please send to support@tgrmn.com

thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
guiri



Joined: 21 Jun 2010
Posts: 28

PostPosted: Tue Jun 22, 2010 2:37 am    Post subject: Reply with quote

Thanks, will do Smile

Hey, what are the chances of a drag and drop interface like Laplink but of course, without making the program as finicky as Laplink Smile

George
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8759

PostPosted: Tue Jun 22, 2010 6:30 am    Post subject: Reply with quote

Hi George,

in VV you can drag folders to the source or target and drag files from source / target to the other side in the comparison window, is that what you mean?

thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
guiri



Joined: 21 Jun 2010
Posts: 28

PostPosted: Tue Jun 22, 2010 6:58 am    Post subject: Reply with quote

Hmm, probably. Damn, I'm such a dumbass but actually, I think I MAY have seen this before but forgotten it.

I will give it a shot. IF you do it this way, does it save the profile in any way or you don't need to mess with it 'cause it IS faster to do it this way?

Also, can you reverse so your SOURCE is on right and your TARGET on left? Just a habit I have to do it that way around.

Anyway, my error transfer just finished although I'm not sure if I somehow interrupted it trying to take a screen capture of it but I'll still send you guys the log and include a couple of captures and if needed, I'll do it again.

Thanks

George
Back to top
guiri



Joined: 21 Jun 2010
Posts: 28

PostPosted: Tue Jun 22, 2010 7:16 am    Post subject: Reply with quote

I feel stupid but how do I get to the comparison window? I get there if I do compare but then it starts counting the files in the source and target and that's not what I want..I just want to drag and drop folders...

Thanks
Back to top
guiri



Joined: 21 Jun 2010
Posts: 28

PostPosted: Tue Jun 22, 2010 7:19 am    Post subject: Reply with quote

Oh, and no can do on the error log, it's too big to email...what now?

George
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8759

PostPosted: Wed Jun 23, 2010 1:32 am    Post subject: Reply with quote

Hello

Quote:
I will give it a shot. IF you do it this way, does it save the profile in any way or you don't need to mess with it 'cause it IS faster to do it this way?


VV won't save the profile unless you instruct it to do that.

Quote:
Also, can you reverse so your SOURCE is on right and your TARGET on left? Just a habit I have to do it that way around.


Yes, but only from the comparison windows menu List -> Switch source and target

Quote:
I feel stupid but how do I get to the comparison window? I get there if I do compare but then it starts counting the files in the source and target and that's not what I want..I just want to drag and drop folders...


The comparison window it's the one that opens after you click on Compare. If you want to drop folders you can do it on the main window too, in the source and target fields.

Quote:
Oh, and no can do on the error log, it's too big to email...what now?


Can you post a few lines with some errors ?

thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
guiri



Joined: 21 Jun 2010
Posts: 28

PostPosted: Fri Jun 25, 2010 3:41 am    Post subject: Reply with quote

Stop the presses! I think I've found the problem and I don't think it's your proggy. I'll report back in a few days once I'm sure...like Arnie says, I'll be back!

Anyway, HOW do I get to the compare window without it starting to count the files in the source and target?

Am I really that stupid or am I missing something? Wait, don't answer that! I'm really sensitive and it might hurt my feelings...
Back to top
guiri



Joined: 21 Jun 2010
Posts: 28

PostPosted: Sat Jun 26, 2010 3:17 am    Post subject: Reply with quote

Alright, if you can, mark this topic as resolved because I think the issue was with the storage server I am moving it to, the unRaid. If you want more info about it, I can explain or link to the thread on another site.

It WAS full but only partially but the way it was set up (AND I screwed something up when installing a new drive), it wouldn't accept more data although there WAS more room.

So, to summarize, it does NOT seem like the problem was with the software Smile

Thanks for the help

George
Back to top
guiri



Joined: 21 Jun 2010
Posts: 28

PostPosted: Thu Nov 04, 2010 9:52 pm    Post subject: Reply with quote

I still don't understand how I can get two windows side by side (or however) and drag and drop folders like in Laplink (which is an INFERIOR product by the way. I just happen to like the interface).

Could you guide me step by step please...

Thanks

George
Back to top
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Support All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © phpBB Group
Copyright © TGRMN Software. TGRMN Software products: