Author |
Message |
stevemoran
Joined: 16 Jun 2010 Posts: 7 Location: London
|
Posted: Wed Jun 16, 2010 7:41 am Post subject: Profile working in VV Pro but not VVE |
|
|
I recently bought VV Engine with ViceVersa Pro.
VVP works fine.
However when I use the same profiles in VVE then I receive the message that the Target cannot be found.
I changed the Target folder names from z:\foldername to the \\computername\foldername as suggested in your help but without success.
(The latter does not work with VV Pro either)
Can anyone volunteer to help? _________________ Technically Challenged |
|
Back to top |
|
|
TGRMN Software Site Admin
Joined: 10 Jan 2005 Posts: 8763
|
Posted: Wed Jun 16, 2010 12:23 pm Post subject: |
|
|
Hello
what error do you get when using \\computername\foldername ? Do you need a user + password to access \\computername\foldername ? thanks _________________ --
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com |
|
Back to top |
|
|
Guest
|
Posted: Wed Jun 16, 2010 9:23 pm Post subject: |
|
|
TGRMN Software wrote: | Hello
what error do you get when using \\computername\foldername ? Do you need a user + password to access \\computername\foldername ? thanks |
I get Target can not be found.
A password isn't needed for that PC / User.
Would I need to use
\\computername\c$\foldername?? |
|
Back to top |
|
|
TGRMN Software Site Admin
Joined: 10 Jan 2005 Posts: 8763
|
|
Back to top |
|
|
Guest
|
Posted: Sat Jun 19, 2010 3:25 pm Post subject: |
|
|
TGRMN Software wrote: | Hello
the drive z:\ , what is that drive mapped to ?
thanks |
This is a laptop that is on the home network.
I can access it on Windows Explorer as drive z:
or on Remote Desktop using the IP Address and the login. |
|
Back to top |
|
|
TGRMN Software Site Admin
Joined: 10 Jan 2005 Posts: 8763
|
Posted: Tue Jun 22, 2010 6:47 am Post subject: |
|
|
On a command line (CMD) type NET USE. It will report the UNC path for each mapped drive, e.g. :
Code: | Status Local Remote Network
-------------------------------------------------------------------------------
OK Z: \\VISTA-PC\Public Microsoft Windows Network
The command completed successfully.
|
Instead of Z:\ , try using the "Remote" path (aka UNC path), in this example \\VISTA-PC\Public _________________ --
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com |
|
Back to top |
|
|
stevemoran
Joined: 16 Jun 2010 Posts: 7 Location: London
|
Posted: Wed Jun 23, 2010 9:01 pm Post subject: |
|
|
TGRMN Software wrote: | On a command line (CMD) type NET USE. It will report the UNC path for each mapped drive, e.g. :
Code: | Status Local Remote Network
-------------------------------------------------------------------------------
OK Z: \\VISTA-PC\Public Microsoft Windows Network
The command completed successfully.
|
Instead of Z:\ , try using the "Remote" path (aka UNC path), in this example \\VISTA-PC\Public |
Hi
This is what I have tried up to now (see first post) and it doesn't work _________________ Technically Challenged |
|
Back to top |
|
|
TGRMN Software Site Admin
Joined: 10 Jan 2005 Posts: 8763
|
|
Back to top |
|
|
stevemoran
Joined: 16 Jun 2010 Posts: 7 Location: London
|
Posted: Thu Jun 24, 2010 5:58 am Post subject: |
|
|
TGRMN Software wrote: | What remote path did you use? thanks |
The same name as that used in Windows Explorer, setup in the "Share" option, and the same name set up as the PC name.
\\HP-Laptop\full directory path to folder name _________________ Technically Challenged |
|
Back to top |
|
|
TGRMN Software Site Admin
Joined: 10 Jan 2005 Posts: 8763
|
Posted: Thu Jun 24, 2010 11:31 am Post subject: |
|
|
\\HP-Laptop\full directory path to folder name
What happens if you paste this same in the windows explorer address bar? Is the share reachable? _________________ --
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com |
|
Back to top |
|
|
Guest
|
Posted: Thu Jun 24, 2010 1:24 pm Post subject: |
|
|
TGRMN Software wrote: | \\HP-Laptop\full directory path to folder name
What happens if you paste this same in the windows explorer address bar? Is the share reachable? |
I cant try this for a couple of days ... however, using the path name in Remote Desktop doesnot work .. I have to use the ip address (and "no" .. using the IP address doesnt work in VVE) |
|
Back to top |
|
|
Jim Guest
|
Posted: Tue Jun 29, 2010 5:02 pm Post subject: same problem |
|
|
I am having the same problem. contacted support and was told to try changing the service since on a server to a user and not just the local system account. That didn't make any difference. I also had it as a mapped drive and tried it with the complete path name and still no luck even with different combinations of the different suggesrtions. VV scheduler is working fine for me. So I just want my money back for the VV engine. But, no one is emailing me back. |
|
Back to top |
|
|
stevemoran
Joined: 16 Jun 2010 Posts: 7 Location: London
|
Posted: Tue Jun 29, 2010 6:35 pm Post subject: |
|
|
TGRMN Software wrote: | \\HP-Laptop\full directory path to folder name
What happens if you paste this same in the windows explorer address bar? Is the share reachable? |
I can access the laptop if I use the path in W. Explorer.
PLEASE HELP!!!!!
AAARRRRGGGHHHHHHH _________________ Technically Challenged |
|
Back to top |
|
|
stevemoran
Joined: 16 Jun 2010 Posts: 7 Location: London
|
Posted: Sun Jul 04, 2010 5:58 pm Post subject: |
|
|
TGRMN Software wrote: | \\HP-Laptop\full directory path to folder name
What happens if you paste this same in the windows explorer address bar? Is the share reachable? |
Nope... still no joy _________________ Technically Challenged |
|
Back to top |
|
|
TGRMN Software Site Admin
Joined: 10 Jan 2005 Posts: 8763
|
|
Back to top |
|
|
|