Forum Index  ViceVersa HOME         FAQ and Knowledge Base

 FAQForum FAQ   SearchSearch Forum  RegisterRegister 
 ProfileProfile   Log inLog in 

VVEngine stops running or does not start

 
Post new topic   Reply to topic     Forum Index -> Support
Author Message
mikeyww



Joined: 23 Dec 2009
Posts: 15
PostPosted: Wed Dec 23, 2009 10:09 pm    Post subject: VVEngine stops running or does not start Reply with quote
At various times, I found that VVEngine stops running or does not start and must be started manually. Why? How to prevent?
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8759
PostPosted: Thu Dec 24, 2009 11:25 am    Post subject: Reply with quote
Hello

shouldn't happen, any extra info in the file VVEngine.log ?

thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
mikeyww



Joined: 23 Dec 2009
Posts: 15
PostPosted: Thu Dec 24, 2009 12:51 pm    Post subject: VVEngine stopped Reply with quote
I don't think so. I checked the log but did not see any sign of problem or that engine had stopped. I did find the place where I had restarted the engine manually, but there is nothing before that to indicate a problem. The engine was reportedly running according to the log, but the tray icon was gray.

I have just turned on my computer. Log file is below. Tray icon is gray and says "VVEngine not running". In browser control panel, VVEngine actually is running.

One possibility might have been that slow computer startup might delay starting of engine. When tray icon runs, engine may not have yet started. In this case, engine starts after tray icon, so icon reports that engine is not running. I tested this, however, by running the tray icon after other programs had started. I had the same result: "VVEngine not running".

I am not using the default port number.

Ideas?

Code:
12/24/2009 07:50:44 [4291906.681-PID:3244-03248] 
12/24/2009 07:50:44 [4291906.900-PID:3244-03248] *************************************
12/24/2009 07:50:44 [4291907.056-PID:3244-03248] **** Starting VVEngine ****
12/24/2009 07:50:45 [4291908.087-PID:3244-03248] Version: VVEngine 1.1 (Build 7)
12/24/2009 07:50:46 [4291908.540-PID:3244-03248] Command Line: "C:\program files\vvengine\vvengine.exe"
12/24/2009 07:50:46 [4291908.790-PID:3244-03248] System: Windows XP (Professional), (x86-32 Processor) v5.1 Build:2600 Service Pack:3
12/24/2009 07:50:46 [4291909.009-PID:3244-03248] Account: mweiner
12/24/2009 07:50:47 [4291909.165-PID:3244-03248] Computer Name: michael-82d4641
12/24/2009 07:50:47 [4291909.290-PID:3244-03248] ViceVersa PRO Path: C:\Program Files\ViceVersa Pro 2\ViceVersa.exe
12/24/2009 07:50:47 [4291909.400-PID:3244-03248] Not running as a Windows Service
12/24/2009 07:50:47 [4291909.572-PID:3244-03248] Log File: C:\Documents and Settings\mweiner\Application Data\VVEngine\VVEngine.log
12/24/2009 07:50:47 [4291909.665-PID:3244-03248] DB File: C:\Documents and Settings\mweiner\Application Data\VVEngine\VVEngine.db
12/24/2009 07:50:47 [4291909.884-PID:3244-03248] Loading TCP/IP settings from XML file C:\Documents and Settings\mweiner\Application Data\VVEngine\VVEngine.xml
12/24/2009 07:50:47 [4291910.134-PID:3244-03248] <TCPIP> tag not found in XML configuration file, VVEngine to use default TCP/IP configuration
12/24/2009 07:50:48 [4291910.431-PID:3244-03248] <HTTP> tag found.
12/24/2009 07:50:48 [4291910.697-PID:3244-03248] <PORT> tag found, vvengine will use port 8002 (HTTP protocol)
12/24/2009 07:50:48 [4291910.884-PID:3244-03248] <CLIENTS> tag not found in XML configuration file, vvengine will accept clients from ALL IPs (HTTP protocol)
12/24/2009 07:50:48 [4291911.134-PID:3244-03248] <PWD> tag found, vvengine access via HTTP requires password (HTTP protocol)
12/24/2009 07:50:49 [4291911.478-PID:3244-03248] <REFRESH> tag not found in XML configuration file, using default 600
12/24/2009 07:50:49 [4291911.743-PID:3244-03248] <CHECKNEW> tag not found in XML configuration file, using default 5
12/24/2009 07:50:49 [4291911.884-PID:3244-03248] <CHECKNEW_AFTERCHANGE> tag not found in XML configuration file, using default 5
12/24/2009 07:50:49 [4291912.087-PID:3244-03648] This computer is named "MICHAEL-82D4641"
12/24/2009 07:50:50 [4291912.228-PID:3244-03648] Server does not accept TCP/IP connections from clients.
12/24/2009 07:50:50 [4291912.587-PID:3244-03248] IPServer started in 500 ms
12/24/2009 07:50:52 [4291914.415-PID:3244-03248] Starting HTTP server on this machine on port 8002
12/24/2009 07:50:52 [4291914.587-PID:3244-03248] HTTP server allows clients from 127.0.0.1
12/24/2009 07:50:52 [4291914.806-PID:3244-03248] Using encrypted HTML pages
12/24/2009 07:50:52 [4291915.025-PID:3244-03248] Loading profiles from XML file C:\Documents and Settings\mweiner\Application Data\VVEngine\VVEngine.xml
12/24/2009 07:50:54 [4291916.462-PID:3244-03248] Disabling profile E:\mwconfigs\viceVersa\sync-work.fsf
12/24/2009 07:50:55 [4291917.181-PID:3244-03248] Disabling profile E:\mwconfigs\viceVersa\totalCommander.fsf
12/24/2009 07:50:55 [4291917.618-PID:3244-03248] Disabling profile E:\mwconfigs\viceVersa\maxthon.fsf
12/24/2009 07:50:56 [4291918.322-PID:3244-03248] Disabling profile E:\mwconfigs\viceVersa\endNote.fsf
12/24/2009 07:50:56 [4291919.072-PID:3244-03248] Disabling profile E:\mwconfigs\viceVersa\vueScan.fsf
12/24/2009 07:50:58 [4291920.353-PID:3244-03248] Disabling profile E:\mwconfigs\viceVersa\network.fsf
12/24/2009 07:50:58 [4291920.634-PID:3244-03248] Disabling profile E:\mwconfigs\viceVersa\sync-work.fsf
12/24/2009 07:50:58 [4291920.837-PID:3244-03248] Enabling profile E:\mwconfigs\viceVersa\sync-work.fsf
12/24/2009 07:50:59 [4291921.322-PID:3244-03248] [E:\mwconfigs\viceVersa\sync-work.fsf] Enabled Run every day, start on 12/21/2009 08:00 PM - After this profile, run E:\mwconfigs\viceVersa\totalCommander.fsf
12/24/2009 07:50:59 [4291921.556-PID:3244-03248] Disabling profile E:\mwconfigs\viceVersa\totalCommander.fsf
12/24/2009 07:50:59 [4291921.775-PID:3244-03248] Enabling profile E:\mwconfigs\viceVersa\totalCommander.fsf
12/24/2009 07:51:00 [4291922.431-PID:3244-03248] [E:\mwconfigs\viceVersa\totalCommander.fsf] Enabled Run manually - After this profile, run E:\mwconfigs\viceVersa\maxthon.fsf
12/24/2009 07:51:00 [4291922.665-PID:3244-03248] Disabling profile E:\mwconfigs\viceVersa\maxthon.fsf
12/24/2009 07:51:00 [4291922.884-PID:3244-03248] Enabling profile E:\mwconfigs\viceVersa\maxthon.fsf
12/24/2009 07:51:01 [4291923.415-PID:3244-03248] [E:\mwconfigs\viceVersa\maxthon.fsf] Enabled Run manually - After this profile, run E:\mwconfigs\viceVersa\endNote.fsf
12/24/2009 07:51:02 [4291924.462-PID:3244-03248] Disabling profile E:\mwconfigs\viceVersa\endNote.fsf
12/24/2009 07:51:02 [4291924.665-PID:3244-03248] Enabling profile E:\mwconfigs\viceVersa\endNote.fsf
12/24/2009 07:51:02 [4291925.134-PID:3244-03248] [E:\mwconfigs\viceVersa\endNote.fsf] Enabled Run manually - After this profile, run E:\mwconfigs\viceVersa\vueScan.fsf
12/24/2009 07:51:03 [4291925.556-PID:3244-03248] Disabling profile E:\mwconfigs\viceVersa\vueScan.fsf
12/24/2009 07:51:03 [4291925.743-PID:3244-03248] Enabling profile E:\mwconfigs\viceVersa\vueScan.fsf
12/24/2009 07:51:03 [4291926.056-PID:3244-03248] [E:\mwconfigs\viceVersa\vueScan.fsf] Enabled Run manually
12/24/2009 07:51:04 [4291926.197-PID:3244-03248] Disabling profile E:\mwconfigs\viceVersa\network.fsf
12/24/2009 07:51:04 [4291926.400-PID:3244-03248] Enabling profile E:\mwconfigs\viceVersa\network.fsf
12/24/2009 07:51:04 [4291926.728-PID:3244-03248] [E:\mwconfigs\viceVersa\network.fsf] Enabled Run manually
12/24/2009 07:51:04 [4291926.900-PID:3244-03248] Saving settings to XML file C:\Documents and Settings\mweiner\Application Data\VVEngine\VVEngine.xml
12/24/2009 07:51:54 [4291977.150-PID:3244-03692] Created backup db file C:\Documents and Settings\mweiner\Application Data\VVEngine\VVEngine.db.bak
Back to top
Guest
Guest
PostPosted: Mon Jan 18, 2010 10:07 am    Post subject: Answer Reply with quote
Answer his question, he PAID for your software!
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8759
PostPosted: Mon Jan 18, 2010 12:51 pm    Post subject: Reply with quote
Sorry, missed this one, is this problem with VVEngine still happening ?
thank you
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
mikeyww



Joined: 23 Dec 2009
Posts: 15
PostPosted: Mon Jan 18, 2010 9:07 pm    Post subject: Reply with quote
Sorry I'm not sure; I have stopped using the program. Thanks for the reply.
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8759
PostPosted: Mon Jan 18, 2010 11:43 pm    Post subject: Reply with quote
OK, thanks.
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
GUEST
Guest
PostPosted: Fri Oct 22, 2010 4:05 pm    Post subject: same problem Reply with quote
sometimes the vvengine grays out and return blue only if i launch vvengine home... is it normal ?
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8759
PostPosted: Sat Oct 23, 2010 9:17 am    Post subject: Reply with quote
No, it's not normal, what version of Windows are you using VVEngine on? thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
aries58net



Joined: 18 Nov 2008
Posts: 20
Location: Italy
PostPosted: Mon Oct 25, 2010 2:19 pm    Post subject: Reply with quote
Windows server 2008 64 bit
_________________
Aries58net
Back to top
aries58net



Joined: 18 Nov 2008
Posts: 20
Location: Italy
PostPosted: Mon Oct 25, 2010 2:27 pm    Post subject: Reply with quote
should I use only he VVscheduler of Viceversa (64bit) 2.5 build 2501 ?? or can the vvengine 2.0 beta solve the problem ? and if yes where can I download it ( in the vvengine page there is nothing, but you say that you are pleased to announce the releas of vvengine 2.0 ......) where the .... can I download It :

p.s. do I have to uninstall vvengine and instal the new version ; do I maintain the profile and license ????

Please answer me


TIA
_________________
Aries58net
Back to top
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Support All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © phpBB Group
Copyright © TGRMN Software. TGRMN Software products:
· ViceVersa: Windows Backup Software, File Synchronization, File Replication
· Compare And Merge: File Compare Software for Windows