Author |
Message |
Mikeszl Guest
|
Posted: Wed Mar 25, 2009 4:22 pm Post subject: Iomega Home Media NAS and ViceVersa compare |
|
|
I'm using an Iomega Home Media 1TB Network Hard Drive. It works fine during normal use with 7 users. When I perform a compare though with Vice Versa it slows to a crawl, becomes laggy or completely unresponsive. The compare runs so slow that it didn't finish in the 18 hours I let it run since yesterday. It never faulted or gave any error, just didn't finish. Once Vice Versa tries to do a comparison on the drive in runs slowly until it is rebooted then works fine.
What can be done to fix this issue? |
|
Back to top |
|
|
JoeWied Guest
|
Posted: Wed Mar 25, 2009 10:22 pm Post subject: Re: Iomega Home Media NAS and Vice Versa compare |
|
|
Mikeszl wrote: | I'm using an Iomega Home Media 1TB Network Hard Drive. It works fine during normal use with 7 users. When I perform a compare though with Vice Versa it slows to a crawl, becomes laggy or completly unresponsive. The compare runs so slow that it didn't finish in the 18 hours I let it run since yesterday. It never faulted or gave any error, just didn't finish. Once Vice Versa tries to do a comparison on the drive in runs slowly untill it is rebotted then works fine.
What can be done to fix this issue? |
How fast is your network ? Are you compare with CRC ? And how much is your amount of data ? (1 TB ??? ) Compare with what ?
I estimate, that your network-drive supports average 3MB /sec maximum. Calculate this once !
regards
Joe |
|
Back to top |
|
|
TGRMN Software Site Admin
Joined: 10 Jan 2005 Posts: 8763
|
Posted: Wed Mar 25, 2009 11:46 pm Post subject: |
|
|
CRC comparison is pretty heavy as it needs to open every file.
You could slow down ViceVersa PRO using the Speed settings in profile settings -> performance
thanks _________________ --
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com |
|
Back to top |
|
|
Mikeszl Guest
|
Posted: Thu Mar 26, 2009 7:40 pm Post subject: |
|
|
When I perform a compare on a smaller section (half gig) the compare works fine. But when I try to do a compare on all 200 gigs of data I have, the compare eventually slows to a crawl, hard disk performace suffers and never recovers.
Will try the speed setting.
Mike |
|
Back to top |
|
|
|