Forum Index  ViceVersa HOME         FAQ and Knowledge Base

 FAQForum FAQ   SearchSearch Forum  RegisterRegister 
 ProfileProfile   Log inLog in 

VVEngine/VVLauncher stops detecting the changes on Target.

 
Post new topic   Reply to topic     Forum Index -> Support
Author Message
IEL_DEEPAK



Joined: 08 Dec 2008
Posts: 7

PostPosted: Thu Dec 11, 2008 1:40 pm    Post subject: VVEngine/VVLauncher stops detecting the changes on Target. Reply with quote

I configured Vice Versa Pro to Sync a folder of around 14 GB between Two servers. The Source is Local and the target is UNC path. I set VVLauncher and then tried with VVEngine too to automatically sync when ever there is a file change on Source or Target. I make sure that there is no permission issues and other configuration issues.

The automatic sync works fine for some hours and then it stops. I found errors like "The specified network name is no longer available." and "The handle is invalid" errors. It might be an error of our network though i am sure there is nothing wrong in the network the main issue is after error the VVEngine/VVLauncher stops detecting the changes on the Target (share directory with full access to the account under which service is running), and the only way to get it correct is to re-start it again (do disable and enable them again). And then again the same cycle follow. Works fine for some time, then there is an error and the stops detecting the change on the Target.
I am working on that since the last 4 days and tried everything i found on this forum but no luck.

I now start lossing confidence on it. Why it stops after working fine for some hours? Is there any know limitation where VVengine/VVLauncher stops detecting the changes on the Target even if share directory is available without any permission issue? Need to know the workaround.

Very Thanks,
Deepak Jain
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8763

PostPosted: Thu Dec 11, 2008 1:46 pm    Post subject: Reply with quote

Hello Deepak Jain,

VVEngine is much better at monitoring network folders so my answer will focus on that. Are you using the latest VVEngine 1.1 (Build 7) ? What is the exact cycle of messages you get from VVEngine ?

thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
IEL_DEEPAK



Joined: 08 Dec 2008
Posts: 7

PostPosted: Fri Dec 12, 2008 5:02 am    Post subject: Reply with quote

Yes. it is the latest VVengine 1.1 (Build 7). Do you want me to try with the mapped drive path rather than UNC?


Also see the error detail (I hide the user & email information here):

2008-12-10 11:02:03 : START ID: 200812101720-3197203-1996
2008-12-10 11:02:03 : ************************************************************
2008-12-10 11:02:03 : Profile Started.
2008-12-10 11:02:03 : ************************************************************
2008-12-10 11:02:03 : Version: ViceVersa PRO 2 Build 2015 (SN101)
2008-12-10 11:02:03 : Command Line: "C:\Program Files\ViceVersa Pro 2\ViceVersa.exe" "C:\ReplicationProfile\content_lms01_lms02.fsf" /hiddenautosync /vveng
2008-12-10 11:02:03 : System: Windows Server 2003, (Enterprise Edition), (x86-32 Processor) v5.2 Build:3790 Service Pack:2
2008-12-10 11:02:03 : User: ********************
2008-12-10 11:02:03 : Computer: *********************
2008-12-10 11:02:03 : **** Profile: C:\ReplicationProfile\content_lms01_lms02.fsf
2008-12-10 11:02:03 : **** - Folders -
2008-12-10 11:02:03 : **** Source: "\\?\C:\Inetpub\wwwroot\iLMS\"
2008-12-10 11:02:03 : **** Target: "\\?\UNC\lms01\ilms\"
2008-12-10 11:02:03 : **** Include Subfolders: Yes
2008-12-10 11:02:03 : **** Exclude files: "\\?\C:\Inetpub\wwwroot\iLMS\global.asa"
2008-12-10 11:02:03 : **** Exclude files: "\\?\C:\Inetpub\wwwroot\iLMS\web.config"
2008-12-10 11:02:03 : **** Exclude subfolders: "\\?\c:\inetpub\wwwroot\ilms\"
2008-12-10 11:02:03 : **** Include subfolders: "\\?\C:\Inetpub\wwwroot\iLMS\Content\"
2008-12-10 11:02:03 : **** Include subfolders: "\\?\C:\Inetpub\wwwroot\iLMS\login\"
2008-12-10 11:02:03 : **** Include subfolders: "\\?\C:\Inetpub\wwwroot\iLMS\language\"
2008-12-10 11:02:03 : **** Exclude subfolders: "\\?\C:\Inetpub\wwwroot\iLMS\Content\PersistedViewState\"
2008-12-10 11:02:03 : **** Exclude subfolders: "\\?\C:\Inetpub\wwwroot\iLMS\Content\Temp\"
2008-12-10 11:02:03 : **** - Comparison Settings -
2008-12-10 11:02:03 : **** Comparison Type: Size and Timestamp
2008-12-10 11:02:03 : **** - Execution Settings -
2008-12-10 11:02:03 : **** Method: Synchronization
2008-12-10 11:02:03 : **** Tracking Database: "C:\ReplicationProfile\vvdb2.tdb"
2008-12-10 11:02:03 : **** Log File: "C:\ReplicationProfile\CONTENT_LMS01_LMS02.log"
2008-12-10 11:02:03 : **** No archive for deleted/replaced source files
2008-12-10 11:02:03 : **** No archive for deleted/replaced target files
2008-12-10 11:02:03 : **** Process Priority: High
2008-12-10 11:02:03 : **** Speed: 100 Buffer Size: 16384 (flush the buffer every write)
2008-12-10 11:02:03 : **** Copy files even if timestamp changes after initial comparison
2008-12-10 11:02:03 : **** Copy file/folder permissions
2008-12-10 11:02:03 : **** Run custom scripts after execution
2008-12-10 11:02:04 : [ERROR] Target: folder "\\?\UNC\lms01\ilms\" not found. The specified network name is no longer available.
2008-12-10 11:02:04 : Exit Code: 14. Target folder not found. [ERROR]
2008-12-10 11:02:04 : Running script C:\Program Files\ViceVersa Pro 2\GlobalScripts\Global_end.vbs
2008-12-10 11:02:04 : Script Output:
2008-12-10 11:02:04 : Microsoft (R) Windows Script Host Version 5.6
2008-12-10 11:02:04 : Copyright (C) Microsoft Corporation 1996-2001. All rights reserved.
2008-12-10 11:02:04 : User Name:
2008-12-10 11:02:04 : Password:
2008-12-10 11:02:04 : From E-Mail: ******************************
2008-12-10 11:02:04 : To E-Mail: *******************************
2008-12-10 11:02:04 : SMTP Server: *****************
2008-12-10 11:02:04 : Send only if error: False
2008-12-10 11:02:04 : Port: 25
2008-12-10 11:02:04 : Ssl: False
2008-12-10 11:02:04 : Sending e-mail message to '***************' from '*****************'
2008-12-10 11:02:04 : DONE.
2008-12-10 11:02:04 : End Script Output
2008-12-10 11:02:04 : Script return code: 0
2008-12-10 11:02:04 : ************************************************************
2008-12-10 11:02:04 : END ID: 200812101720-3197203-1996
Back to top
IEL_DEEPAK



Joined: 08 Dec 2008
Posts: 7

PostPosted: Fri Dec 12, 2008 11:49 am    Post subject: Reply with quote

Hi,
I also tried with Mapped drive path but it was unable to access the Target.
Also there is one different error i receive as below:

"The semaphore timeout period has expired."

As network error cases are 2-3% of total so i am not much worried about that.

I think the big issue is why it stops detecting the changes on Target even it sync successfully at least 2-3 times after the error occurs.

-Deepak
Back to top
TGRMN Software
Site Admin


Joined: 10 Jan 2005
Posts: 8763

PostPosted: Mon Dec 15, 2008 3:38 am    Post subject: Reply with quote

Hi

Do you need user and password for \?\UNC\lms01\ilms\" ?

thanks
_________________
--
TGRMN Software Support
http://www.tgrmn.com
http://www.compareandmerge.com
Back to top
IEL_DEEPAK



Joined: 08 Dec 2008
Posts: 7

PostPosted: Mon Dec 15, 2008 9:29 am    Post subject: Reply with quote

The VVEngine service is running under domain admin account which has full permission to the UNC path (Which is Target) as well as the Source.
-Deepak
Back to top
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Support All times are GMT
Page 1 of 1

 
Jump to:  
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © phpBB Group
Copyright © TGRMN Software. TGRMN Software products: